Go Back   Infamous Nissan - Hardbody / Frontier Forums > Tech Area > Exterior & Paint and Body

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-21-2021, 12:48 AM   #1
Join Date: May 2021
Location: MS
Posts: 6
Vehicle: 1991 Hardbody ex-cab
Thanks: 10
Thanked 2 Times in 1 Post
Default Loose mirror?

I am on my way to rattling this poor truck apart. The glue gave up on me and everytime the bass is up the mirror is flopping around.
I drilled a small hole and stuck the straw in there and hit it with some loctite spray foam. Now it's solid. I went in at the bottom middle. To do again I'd go a little further to the outside edge just to make sure when the foam expansion is happening none drips on the paint. I didn't have an issue going in the middle though. Once it stopped expanding out I trimmed it with a razor and dabbed a little flat black on the foam with a q-tip. Also it goes alot farther than you might think don't put to much in there.
Hope that helps someone with loose mirror glass on a hardbody.
D21dailydriver is offline   Reply With Quote
Thanked by:
PoBoi850 (05-21-2021), YEPEE (05-21-2021)

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 12:58 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.