Go Back   Infamous Nissan - Hardbody / Frontier Forums > Model Specific > Hardbody Forum (D21)

Reply
 
Thread Tools Display Modes
Old 04-18-2021, 05:11 PM   #1
Jason Bourne
 
Join Date: Apr 2021
Location: TX
Posts: 36
Vehicle: 1993 Nissan D21 2WD 2.4L MT
Thanks: 19
Thanked 2 Times in 2 Posts
Default Whatís the best shop manual for a 1993 D21

Hello guys Iím new to the forum. I just recently bought a 1993 D21 base model with 2.4L and manual transmission. I have already found a lot of good info.

My question is whatís the best shop manual for my truck? I found a link on this site to some shop manuals but my choices are 1988 or 1994. Their isnít one listed for 1993. Which one is closest?

From looking through this forum I found info that says 1993 is an odd ball year (lucky me). Can anyone tell me why it is an odd ball? What makes it different from a 1992 or 1994?

Also the sticker on the truck says the manufacture date on the truck is 12/92. Does that make any difference? When I went to go buy a new alternator belt they had one for trucks built between Aug 1 1989 through June 30 1993. They had another belt that said 1993 or newer? Did Nissan make changes to the truck mid year? If so does anyone know what those changes are?

Thanks for any help.
Jason Bourne is offline   Reply With Quote
Old 04-18-2021, 06:50 PM   #2
Deerhurst
4/86 SE-V6 2 tone 4x4 HB
 
Deerhurst's Avatar
 
Join Date: Apr 2013
Location: Oregon
Posts: 7,652
Vehicle: 1986.5 SE-V6 4WD D21, 2003 Audi A4 Avant 3.0 Quattro
Thanks: 897
Thanked 974 Times in 881 Posts
Default

Factory Service Manual followed by Chilton's. Haynes sucks for the D21. 94 will be closest 88 is very different



93 is a transitional year. Some stuff is 92. Some is 94. The cluster for square dash 93s is unique to 93.



86.5 and 93 are the transitional years for the D21. Major half year change in 86.5 with face lift stuff and small changes in 93.
__________________
1986.5 SE-V6 4X4 D21 Hardbody
Pacesetter Long Tube Headers
Morimoto Mini D2S HID Projectors and Hella 500s
VG33i
Deerhurst is online now   Reply With Quote
Thanked by:
Jason Bourne (04-18-2021)
Old 04-18-2021, 07:29 PM   #3
ahardb0dy
The Post Count Whore
 
ahardb0dy's Avatar
 
Join Date: May 2014
Location: Sorrento, Florida
Age: 55
Posts: 7,888
Vehicle: 2017 Nissan Frontier Desert Runner
Thanks: 71
Thanked 997 Times in 910 Posts
Default

OEM, 93 service manual only available in paper copy, check E-bay, only one OEM manual on E-bay right now for a too high price of $187, You can use the 94 manual for most things, Like Deerhurst said the 93 was the bastard year with some new things introduced, but for the majority of mechanical items the 94 manual should be fine.


Free online manual here:


https://www.nicoclub.com/nissan-service-manuals


As to changes on the 93, some changes were the hood without the vents in the front and the gauge cluster being different than the 92 and the 94 ( I use to own a 93),



From Wikipedia: "In 1992, Nissan had a crossover year in which the 1993 model year (mid-1992 to mid-1993 calendar year) had the dashboard of the 1986Ĺ–1992 model years with a slightly refreshed body appearance as well as some small interior changes and a revised instrument panel. In a first for the auto industry,[citation needed] this model used the new R134A air conditioning refrigerant."
__________________
My name is Tony and I'm a Infamousaholic

Current truck - 2017 Nissan Frontier Desert Runner ,

(formerly owned: 1993 Nissan Hardbody king cab 2wd, 90 Nissan Sentra, 94 Nissan Pathfinder SE 4x4, 05 Nissan Titan, 87 Nissan SE-V6 4x4 king cab, 94 Infiniti Q45t & 80 Datsun 310GX )

Last edited by ahardb0dy; 04-18-2021 at 07:36 PM.
ahardb0dy is offline   Reply With Quote
Thanked by:
Jason Bourne (04-18-2021)
Old 04-18-2021, 08:44 PM   #4
Jason Bourne
 
Join Date: Apr 2021
Location: TX
Posts: 36
Vehicle: 1993 Nissan D21 2WD 2.4L MT
Thanks: 19
Thanked 2 Times in 2 Posts
Default

Thanks for the info Deerhurst and ahardb0dy. It’s actually my sons truck but I’m super stoked to help him fix it up. I think he got a steal. He paid $4800 for the truck.

It has 86k miles. I’m in Texas and the truck has always been in Texas so there is zero rust. The guy we bought it from inherited it from his grandfather (original owner) who didn’t really drive it. It also hasn’t been registered since 2016 which made me a little nervous but it starts up and runs fine. The body is very straight only a few minor dings. The paint is original but it is toast I think that is to be expected.

It’s the base model and only has a picture where the tach should be. That blew me away. I think Nissan cheaped out a little too much there. At some point we are going to try and see about adding a tach.
Jason Bourne is offline   Reply With Quote
Thanked by:
Deerhurst (04-18-2021)
Old 04-18-2021, 10:15 PM   #5
Deerhurst
4/86 SE-V6 2 tone 4x4 HB
 
Deerhurst's Avatar
 
Join Date: Apr 2013
Location: Oregon
Posts: 7,652
Vehicle: 1986.5 SE-V6 4WD D21, 2003 Audi A4 Avant 3.0 Quattro
Thanks: 897
Thanked 974 Times in 881 Posts
Default

If you want to add a tach find another 93 dash with a tach that came from a truck with the same motor as yours. It'll drop right in.



The bare bones trucks have no tach. Toyota did this a lot too.
__________________
1986.5 SE-V6 4X4 D21 Hardbody
Pacesetter Long Tube Headers
Morimoto Mini D2S HID Projectors and Hella 500s
VG33i
Deerhurst is online now   Reply With Quote
Old 04-19-2021, 12:05 AM   #6
Jason Bourne
 
Join Date: Apr 2021
Location: TX
Posts: 36
Vehicle: 1993 Nissan D21 2WD 2.4L MT
Thanks: 19
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by Deerhurst View Post
If you want to add a tach find another 93 dash with a tach that came from a truck with the same motor as yours. It'll drop right in.



The bare bones trucks have no tach. Toyota did this a lot too.
Do you think it is possible for me take another tach from a 93 and put it in my cluster? The truck only has 86k on the odometer and I donít want to lose that.

Or is it possible for me to switch over my odometer into the cluster with the tach? The only clusters from 93 I have seen have 2 trip meters below the odometer.

Iím trying to teach my son to drive stick and an rpm gauge would be helpful.
Jason Bourne is offline   Reply With Quote
Old 04-19-2021, 12:42 AM   #7
Deerhurst
4/86 SE-V6 2 tone 4x4 HB
 
Deerhurst's Avatar
 
Join Date: Apr 2013
Location: Oregon
Posts: 7,652
Vehicle: 1986.5 SE-V6 4WD D21, 2003 Audi A4 Avant 3.0 Quattro
Thanks: 897
Thanked 974 Times in 881 Posts
Default

I have yet to take a cluster apart but I have heard they are pretty modular. The hardest part is not breaking the lens when disassembling the entire thing.



I like a tach anyways. Between that and a vacuum gauge you basically have everything you need to know exactly how your engine is running.
__________________
1986.5 SE-V6 4X4 D21 Hardbody
Pacesetter Long Tube Headers
Morimoto Mini D2S HID Projectors and Hella 500s
VG33i
Deerhurst is online now   Reply With Quote
Old 04-19-2021, 04:14 AM   #8
ahardb0dy
The Post Count Whore
 
ahardb0dy's Avatar
 
Join Date: May 2014
Location: Sorrento, Florida
Age: 55
Posts: 7,888
Vehicle: 2017 Nissan Frontier Desert Runner
Thanks: 71
Thanked 997 Times in 910 Posts
Default

I've taken gauge clusters apart in other Nissan's, it's not hard to do, adding the tach should be pretty easy.


My former 93 gauge cluster with tach:





Another difference the 93 had, first year of this with lights near rear view mirror:


__________________
My name is Tony and I'm a Infamousaholic

Current truck - 2017 Nissan Frontier Desert Runner ,

(formerly owned: 1993 Nissan Hardbody king cab 2wd, 90 Nissan Sentra, 94 Nissan Pathfinder SE 4x4, 05 Nissan Titan, 87 Nissan SE-V6 4x4 king cab, 94 Infiniti Q45t & 80 Datsun 310GX )
ahardb0dy is offline   Reply With Quote
Old 04-19-2021, 06:06 AM   #9
Jason Bourne
 
Join Date: Apr 2021
Location: TX
Posts: 36
Vehicle: 1993 Nissan D21 2WD 2.4L MT
Thanks: 19
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by ahardb0dy View Post
I've taken gauge clusters apart in other Nissan's, it's not hard to do, adding the tach should be pretty easy.


My former 93 gauge cluster with tach:





Another difference the 93 had, first year of this with lights near rear view mirror:


Those lights by the rear view are nice. That must have been an upgrade because my 93 has it behind the drivers head.
Jason Bourne is offline   Reply With Quote
Old 04-19-2021, 07:22 AM   #10
XoXSciFiGuy
 
XoXSciFiGuy's Avatar
 
Join Date: May 2017
Location: Auburn, WA
Posts: 3,176
Vehicle: 1997 D21 King Cab XE 2WD
Thanks: 211
Thanked 619 Times in 560 Posts
Default

Hi Jason:
The PDF versions of the FSM's are actually better in some ways than the paper copies. I have some years available in that format where I boosted the resolution to 600 dpi. The reason being you can blow up individual pages to the sky which helps on things like wiring diagrams or other pictures that weren't presented as well in the paper versions. In other words, you can blow up a page, or a piece from a page to six times its normal size and not lose detail.

Some folks take their laptop to the garage and use the manual that way. If you have a page or a piece of a page you want to blow up and print, this is even easier if you have a wireless printer.

In any case, I can provide you with the 90/94/95 versions and except for a few small details they are mostly the same anyway. There were some changes between 90-97 but not that many. If you had the 90 and 94 versions, this will cover 98% of anything you will have to work on, and you can easily wing the other 2% or just ask a question here at IN.

My email is adventurebooksofseattle AT gmail. My name is Robert. Don't forget to remind me you have a 93 truck. The FSM is the only way to go. 1,200 pages or so in them can't be wrong.
__________________

1997 King Cab XE, 5-sp, canopy, AC/PS, KA24E, 129,000 miles. Need a technical manual? Drop me a message. Chilton's for amateurs.
XoXSciFiGuy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:27 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.