Go Back   Infamous Nissan - Hardbody / Frontier Forums > Tech Area > Engine and Drivetrain

Reply
 
Thread Tools Display Modes
Old 02-13-2021, 05:52 PM   #1
KivPanther
Furball
 
KivPanther's Avatar
 
Join Date: Oct 2020
Location: North Carolina
Posts: 141
Vehicle: 1994 XE King Cab V6
Thanks: 3
Thanked 26 Times in 23 Posts
Default Question for 5-speed owners

Iíve noticed that there isnít but about 500 RPM or so difference between 4th and 5th gear on my truck, and Iím typically up around 3500+ RPM at 65-70 mph on the highway in 5th. Is this typical or might there be something odd about my transmission?
__________________
KivPanther is offline   Reply With Quote
Old 02-13-2021, 08:58 PM   #2
LugNut1990
 
LugNut1990's Avatar
 
Join Date: Jul 2015
Location: N.E. Kansas
Posts: 912
Vehicle: 1990 Nissan Hardbody
Thanks: 0
Thanked 138 Times in 119 Posts
Default

5th is overdrive. May be quite a while until the next time I take the D21 on the highway, so can't say what my RPMs are at 70.



Have the gears in your differential(s) been changed?
__________________
Original owner
1990 Nissan Hardbody, Aztec Red
Standard cab, 4x4, KA24E, 5-speed
Intentionally near-stock
Mods: Second OEM horn, stereo/speakers/sub,
mud and snow tires, HD trailer hitch (cat 3+),
liquid bed liner, G1W dashcam
Definitely not for sale!
LugNut1990 is offline   Reply With Quote
Old 02-13-2021, 09:23 PM   #3
MidnightSun
 
Join Date: Oct 2018
Location: MN
Posts: 106
Vehicle: 91 D21 vg33 5speed 4x4
Thanks: 21
Thanked 15 Times in 14 Posts
Default

Thats the same with mine. I cant recall off hand what my gearing is, but my rpms are around there at that speed.
MidnightSun is offline   Reply With Quote
Thanked by:
KivPanther (02-13-2021)
Old 02-13-2021, 09:27 PM   #4
KivPanther
Furball
 
KivPanther's Avatar
 
Join Date: Oct 2020
Location: North Carolina
Posts: 141
Vehicle: 1994 XE King Cab V6
Thanks: 3
Thanked 26 Times in 23 Posts
Default

As far as I know the differentials are bone stock and haven’t been tampered with. Mine is a V6 for reference. I’m trying to chase down why I’m getting about 13 mpg and wondered if that was a normal rev range.

After some further looking it seems like that’s normal for the 5-speed V6. I must have something else going on.
__________________

Last edited by KivPanther; 02-13-2021 at 09:53 PM.
KivPanther is offline   Reply With Quote
Old 02-14-2021, 01:05 AM   #5
Deerhurst
4/86 SE-V6 2 tone 4x4 HB
 
Deerhurst's Avatar
 
Join Date: Apr 2013
Location: Oregon
Posts: 8,042
Vehicle: 1986.5 SE-V6 4WD D21, 2003 Audi A4 Avant 3.0 Quattro
Thanks: 917
Thanked 1,080 Times in 976 Posts
Default

What axle ratio do you have?



I have 4.11s in my truck. I turn 2700RPM ish at 70. I get about 18MPG with 31x10.5s and a TBI VG33 with long tubes. My truck was rated at 20MPG on the highway when stock on 235/75/15s and a VG30. I could get as high as 25MPG at 70 on a flat highway.
__________________
1986.5 SE-V6 4X4 D21 Hardbody
Pacesetter Long Tube Headers
Morimoto Mini D2S HID Projectors and Hella 500s
VG33i
Deerhurst is offline   Reply With Quote
Old 02-14-2021, 04:09 AM   #6
LugNut1990
 
LugNut1990's Avatar
 
Join Date: Jul 2015
Location: N.E. Kansas
Posts: 912
Vehicle: 1990 Nissan Hardbody
Thanks: 0
Thanked 138 Times in 119 Posts
Default

Going from narrow OEM-type highway to mud/snow tires dropped my highway MPG by at least 1.
__________________
Original owner
1990 Nissan Hardbody, Aztec Red
Standard cab, 4x4, KA24E, 5-speed
Intentionally near-stock
Mods: Second OEM horn, stereo/speakers/sub,
mud and snow tires, HD trailer hitch (cat 3+),
liquid bed liner, G1W dashcam
Definitely not for sale!
LugNut1990 is offline   Reply With Quote
Old 02-14-2021, 04:32 AM   #7
dvdswan
Super Moderator
 
dvdswan's Avatar
 
Join Date: Mar 2009
Location: Port Orchard, WA
Posts: 5,681
Vehicle: 96 HB
Thanks: 212
Thanked 906 Times in 791 Posts
Default

Ok, remember back in the 80s-90s when the speed limit was 55-60 mph. RPMs were right around 3k to 3100 rpm at 60. So 3500 at 70 is normal.
__________________
Dave
96 HB XE
SAS'd D44 3-link on 35s
http://www.cardomain.com/ride/2618002
dvdswan is offline   Reply With Quote
Old 02-14-2021, 05:21 AM   #8
KivPanther
Furball
 
KivPanther's Avatar
 
Join Date: Oct 2020
Location: North Carolina
Posts: 141
Vehicle: 1994 XE King Cab V6
Thanks: 3
Thanked 26 Times in 23 Posts
Default

I'm not running weird tires or anything. Just Goodyear Wranglers in 235/75r15. Rear axle is an HG43.


I'm fairly certain my fuel issues lie elsewhere in the engine or exhaust, but I wanted to make sure that was normal.
__________________
KivPanther is offline   Reply With Quote
Old 02-14-2021, 06:40 AM   #9
PorknBeans
 
Join Date: Dec 2019
Location: Where I can see the air I breathe...
Posts: 743
Vehicle: 1997 XE King Cab with 3 pedals, KA24E & 2WD, Yíall
Thanks: 77
Thanked 224 Times in 186 Posts
Default

Check for vacuum or exhaust leaks.

My 97 HB was in "Open Loop" due to an exhaust leak. I pulled the midpipe off the exhaust manifold collector and there are two crush washers that were split and should have been solid circular. Changed them out and drove my truck to close the monitors. I was only getting 130 mi. with a full tank driving between 55-60 mph and shift points were every 15 mph. Disgraceful. All good now.

Mine is a 4 cyl. 2-wheel drive; 5-spd. with a MagnaFlow Cat Back exhaust system. I can pull 23.5 mpg, if I go easy on the pedal while driving.
__________________

Last edited by PorknBeans; 02-15-2021 at 05:09 PM.
PorknBeans is offline   Reply With Quote
Thanked by:
KivPanther (02-14-2021)
Old 02-14-2021, 07:01 AM   #10
Hawairish
 
Join Date: Dec 2019
Location: Arizona
Posts: 20
Vehicle: 1998 Frontier KC XE MT 2WD, 2004 Pathfinder SE AT 4WD, 2000 Frontier CC SE AT 4WD
Thanks: 2
Thanked 4 Times in 4 Posts
Default

Just from a numerical standpoint, 4th gear is 1:1 and 5th is 0.86:1, or a 14% difference. 3,500 RPM x 1.14 = 3,990 RPM, so a 500 RPM difference seems right to me. 3500 RPM at 70 MPH doesn’t seem abnormal to me.
Hawairish is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:04 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.