Changing out the filler neck - Infamous Nissan

Tropicalcats · 04-02-2021, 02:41 PM

Finally looks like I’ll have the time to pull the bed this weekend. I will be changing the filler neck. What all do I need to make that happen?

PorknBeans · 04-02-2021, 02:52 PM

You'll need to remove the four 12mm hex head screws behind the fuel door that hold the filler neck assembly to the bed. Also, remove the screw clamp at the bottom of the filler neck assembly that holds the fuel hose and finally, remove the clamp and small diameter fuel return hose.

You should inspect the fuel hoses while the bed is off for cracks or tears, if they've never been changed. Change out, if necessary.

04-02-2021, 02:41 PM	#1
Tropicalcats Join Date: Aug 2017 Location: Perrysburg, Ohio Posts: 645 Vehicle: 1995 Nissan King Cab XE Thanks: 73 Thanked 68 Times in 63 Posts	Changing out the filler neck Finally looks like I’ll have the time to pull the bed this weekend. I will be changing the filler neck. What all do I need to make that happen? __________________ The one constant in life is change. “Never, Never, Never give up” Winston Churchill

04-02-2021, 02:52 PM	#2
PorknBeans Join Date: Dec 2019 Location: Where I can see the air I breathe... Posts: 783 Vehicle: 1997 XE King Cab with 3 pedals, KA24E & 2WD, Y’all Thanks: 82 Thanked 235 Times in 195 Posts	You'll need to remove the four 12mm hex head screws behind the fuel door that hold the filler neck assembly to the bed. Also, remove the screw clamp at the bottom of the filler neck assembly that holds the fuel hose and finally, remove the clamp and small diameter fuel return hose. You should inspect the fuel hoses while the bed is off for cracks or tears, if they've never been changed. Change out, if necessary. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode