Bench seat in pathy.... - Infamous Nissan

RoleyPoley · 02-25-2014, 04:32 AM

Has anyone ever put a bench seat in the front of a pathy? I have been thinking about this for a while....

JohnnyRingo · 02-25-2014, 04:39 AM

The buckets from a 95 or earlier pathfinder fit in a hardbody, so in theory it should be easy. You would have to remove the center console. Where's your parking brake?

RoleyPoley · 02-25-2014, 04:49 AM

Technically I wont need an e-brake I can just lay it out. I was just wondering if anyone has ever done it?

sicnis · 02-25-2014, 01:11 PM

i had a bench in an ext cab once, love the pathy BTW

Scrappy · 02-25-2014, 02:01 PM

oh you need the e-brake. I've had a truck roll layed out.

Ven · 02-25-2014, 02:10 PM

I was planning on running in the front of mine, right now I have a bench and a pair of buckets and I havent fully decided which way Im gonna go, I like the look of dual benches but I also like the comfort of the buckets for reclining and such. either way it should pretty much bolt right in. the E-brake is the only thing that will need to be removed or relocated to under dash like the trucks.

RoleyPoley · 03-01-2014, 01:43 AM

Yea I will figure it out because I really want a bench up front. Have to see after the motor and trans is in.

Hardbody92 · 05-23-2014, 03:51 AM

I had a bench in my kingcab. Hated it! no where to put a cup holder and I always had the urge to recline but couldn't . If this is going to be your daily vehicle I recommend you not doing it.

Shook · 05-23-2014, 06:38 AM

Probably going to do it in my crew cab and just make some cup holders. If you can fit a split bench then you have the look of a bench and comfort of buckets.

JOHN92 · 05-23-2014, 03:27 PM

How could a truck fully layed out possibly still roll (I dont have an e-brake because it was binding when too low)

02-25-2014, 04:32 AM	#1
RoleyPoley Join Date: Apr 2009 Location: Boise,ID Posts: 17 Vehicle: 1991 Pathy Thanks: 0 Thanked 1 Time in 1 Post	Bench seat in pathy.... Has anyone ever put a bench seat in the front of a pathy? I have been thinking about this for a while....

02-25-2014, 04:39 AM	#2
JohnnyRingo Join Date: Sep 2013 Location: Long Beach, CA Age: 51 Posts: 270 Vehicle: 97 Nissan HB Thanks: 29 Thanked 33 Times in 33 Posts	The buckets from a 95 or earlier pathfinder fit in a hardbody, so in theory it should be easy. You would have to remove the center console. Where's your parking brake? __________________ *1997 HB XE KA24E 5-Speed HF35*

02-25-2014, 01:11 PM	#4
sicnis Join Date: Nov 2010 Location: SanAntonio Tx Age: 39 Posts: 1,483 Vehicle: 1993 D21 Reg. Cab Thanks: 164 Thanked 151 Times in 139 Posts	i had a bench in an ext cab once, love the pathy BTW __________________

05-23-2014, 03:27 PM	#10
JOHN92 Join Date: Nov 2010 Location: South Jersey Age: 44 Posts: 1,273 Vehicle: 1988 Nissan Hardbody Thanks: 72 Thanked 111 Times in 95 Posts	How could a truck fully layed out possibly still roll (I dont have an e-brake because it was binding when too low) __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-25-2014, 04:49 AM	#3
RoleyPoley Join Date: Apr 2009 Location: Boise,ID Posts: 17 Vehicle: 1991 Pathy Thanks: 0 Thanked 1 Time in 1 Post	Technically I wont need an e-brake I can just lay it out. I was just wondering if anyone has ever done it?

02-25-2014, 02:01 PM	#5
Scrappy Look into my one good eye Join Date: Sep 2008 Location: Eden, North Carolina Posts: 761 Vehicle: 93 extended Cab Hardbody Thanks: 25 Thanked 36 Times in 35 Posts	oh you need the e-brake. I've had a truck roll layed out.

02-25-2014, 02:10 PM	#6
Ven ///Relaxed Atmosphere Join Date: Sep 2008 Location: Sunny Florida Posts: 1,897 Vehicle: 1994 Pathfinder Thanks: 144 Thanked 229 Times in 189 Posts	I was planning on running in the front of mine, right now I have a bench and a pair of buckets and I havent fully decided which way Im gonna go, I like the look of dual benches but I also like the comfort of the buckets for reclining and such. either way it should pretty much bolt right in. the E-brake is the only thing that will need to be removed or relocated to under dash like the trucks.

03-01-2014, 01:43 AM	#7
RoleyPoley Join Date: Apr 2009 Location: Boise,ID Posts: 17 Vehicle: 1991 Pathy Thanks: 0 Thanked 1 Time in 1 Post	Yea I will figure it out because I really want a bench up front. Have to see after the motor and trans is in.

05-23-2014, 03:51 AM	#8
Hardbody92 Join Date: Jan 2013 Location: South West Florida Posts: 942 Vehicle: 1992 hardbody Thanks: 355 Thanked 128 Times in 118 Posts	I had a bench in my kingcab. Hated it! no where to put a cup holder and I always had the urge to recline but couldn't . If this is going to be your daily vehicle I recommend you not doing it.

05-23-2014, 06:38 AM	#9
Shook Join Date: Mar 2012 Location: Milton,FL Posts: 157 Vehicle: Fro Thanks: 2 Thanked 20 Times in 18 Posts	Probably going to do it in my crew cab and just make some cup holders. If you can fit a split bench then you have the look of a bench and comfort of buckets.