Replacing the Wax-Type Fast Idle Solenoid (Z24i engine) - Page 2 - Infamous Nissan

LURK3R · 06-03-2016, 12:00 AM

Do the carbies on the Z24 have a similar style device, because my Z24 acts exactly like this when cold. 4 months of cold are horrible with my truck because it's so tempremental

John K · 12-06-2016, 03:19 PM

I've looked everywhere for the Fast Idle Control Valve for my 1986 D21. Does anyone have a source for one?

I've searched for part numbers:AIRTEX 2H1264, NISSAN 1639403G15, CARQUEST 734398, WELLS AC4017.

Reserector · 12-06-2016, 03:42 PM

I have an old TBI that still has a god one on it. But before you go replacing it, check the travel from cold to hot as the engine warms up. It may not be bad. I'm pretty sure there is a measurement listed in the service manual.

John K · 12-06-2016, 07:44 PM

Thanks, I look at it this weekend. I'm pretty sure its frozen since I see blue residue around the plunger area and where the hose attaches on the front side.

thatdamnalex · 01-31-2017, 08:21 PM

Is it possible to restore an old one? I haven't been able to find one of these anywhere

YEPEE · 01-31-2017, 08:48 PM

I have a oem pt# 16391-12G00, hope it helps

thatdamnalex · 01-31-2017, 10:37 PM

Quote:

Originally Posted by YEPEE

I have a oem pt# 16391-12G00, hope it helps

perfect I actually found one on nissanpartsdeal.com. Thanks!

thatdamnalex · 03-02-2017, 10:17 PM

i was able to purchase the solenoid but it didnt come with the housing. will using the old housing be fine?

Justenderson · 03-06-2017, 02:54 AM

I'm sorry to crash your thread here. I am brand new to this forum and have a transmission question. Could you point me to the proper thread?

Fuffufnick · 03-07-2017, 10:50 PM

@Tally HB... TY sir for this exceptional tutorial. I have joined this forum due to the content and quality of this post.

06-03-2016, 12:00 AM	#11
LURK3R Blackfinger Join Date: May 2013 Location: Bendigo, Victoria, Australia Posts: 126 Vehicle: D21 Hardbody '89 Thanks: 10 Thanked 9 Times in 8 Posts	Do the carbies on the Z24 have a similar style device, because my Z24 acts exactly like this when cold. 4 months of cold are horrible with my truck because it's so tempremental __________________ '89 Nissan Navara Static 5 inches lowered Z24 Carb

12-06-2016, 03:19 PM	#12
John K Join Date: Dec 2016 Location: Herndon, VA Posts: 2 Vehicle: Nissan D21 1986 Thanks: 0 Thanked 0 Times in 0 Posts	Can't Find a replacment Valve I've looked everywhere for the Fast Idle Control Valve for my 1986 D21. Does anyone have a source for one? I've searched for part numbers:AIRTEX 2H1264, NISSAN 1639403G15, CARQUEST 734398, WELLS AC4017.

12-06-2016, 03:42 PM	#13
Reserector the Flaming Marshmallow Join Date: Oct 2015 Location: Laurel, MS Posts: 2,091 Vehicle: '86.5 Nissan HB KC 4x4 5.3V8 Thanks: 125 Thanked 586 Times in 460 Posts	I have an old TBI that still has a god one on it. But before you go replacing it, check the travel from cold to hot as the engine warms up. It may not be bad. I'm pretty sure there is a measurement listed in the service manual. __________________ Becoming the Flaming Marshmallow * SAS * V8 Conversion * The FM "Z71 Conversion" Explained Vid * Ride-Along Vid

03-07-2017, 10:50 PM	#20
Fuffufnick Join Date: Mar 2017 Location: WI Posts: 10 Vehicle: Nissan D21 1987 Thanks: 2 Thanked 1 Time in 1 Post	@Tally HB... TY sir for this exceptional tutorial. I have joined this forum due to the content and quality of this post. Last edited by Fuffufnick; 03-07-2017 at 11:14 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-06-2016, 07:44 PM	#14
John K Join Date: Dec 2016 Location: Herndon, VA Posts: 2 Vehicle: Nissan D21 1986 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks, I look at it this weekend. I'm pretty sure its frozen since I see blue residue around the plunger area and where the hose attaches on the front side.

01-31-2017, 08:21 PM	#15
thatdamnalex Join Date: Sep 2016 Location: inland empire, CA Posts: 15 Vehicle: 1987 nissan d21 hardbody Thanks: 6 Thanked 1 Time in 1 Post	Is it possible to restore an old one? I haven't been able to find one of these anywhere

01-31-2017, 08:48 PM	#16
YEPEE Join Date: Mar 2013 Location: Phoenix Posts: 1,957 Vehicle: 86.5 HB,95 HB, 02 Sentra Spec-V Thanks: 314 Thanked 358 Times in 305 Posts	I have a oem pt# 16391-12G00, hope it helps

03-02-2017, 10:17 PM	#18
thatdamnalex Join Date: Sep 2016 Location: inland empire, CA Posts: 15 Vehicle: 1987 nissan d21 hardbody Thanks: 6 Thanked 1 Time in 1 Post	i was able to purchase the solenoid but it didnt come with the housing. will using the old housing be fine?

03-06-2017, 02:54 AM	#19
Justenderson Join Date: Mar 2017 Location: Georgia Posts: 12 Vehicle: 1986 Nissan d21 Thanks: 2 Thanked 0 Times in 0 Posts	I'm sorry to crash your thread here. I am brand new to this forum and have a transmission question. Could you point me to the proper thread?