Go Back   Infamous Nissan - Hardbody / Frontier Forums > Commerce > For Sale or Trade

Notices

Reply
 
Thread Tools Display Modes
Old 06-15-2022, 09:12 AM   #1
mklotz70
 
Join Date: Nov 2010
Location: Gresham, OR
Posts: 26
Vehicle: was '64 NL320
Thanks: 3
Thanked 9 Times in 5 Posts
Default HB D21 2wd Adjustable Upper Control Arms

Hello Everyone,

I am starting the group buy for the Hardbody(D21 2wd) Adjustable Upper Control Arms.

I致e created a page on my website with the details and terms. Hopefully, it addresses most of the questions you値l have. If you池e using a cell phone or tablet to view it, you should tell your browser to use the desktop site in order to use the links more easily.

At this time, I知 not quite sure how long I will leave the group buy open to accept customers in. I知 currently thinking that I値l need to have all the deposits in by mid July. That may change. At that point, I will be pushing to get them made within 60 days from then. Roughly 3 months to make them and ship them. I知 hoping to finish sooner, but supply delays may push the date.

http://www.bluehandsinc.com/hb-adj-uca.html

-Mike
Attached Images
File Type: jpg IN pic.jpg (55.8 KB, 10 views)
mklotz70 is offline   Reply With Quote
Old 06-15-2022, 09:57 AM   #2
alabama_lowlife
Owner and Administrator
 
alabama_lowlife's Avatar
 
Join Date: Sep 2008
Location: New Brockton, Alabama
Age: 42
Posts: 10,877
Vehicle: 2012 370Z, 1970 Datsun 521, 1995 Nissan Hardbody x2, 1994 Hardbody
Thanks: 1,123
Thanked 2,260 Times in 1,857 Posts
Default

Mike makes great parts y’all. He did the machining of the hubs and brake rotors to allow me to put 350Z brembo rotors on my son’s hardbody. He also built the tool I used to replace the kingpin bushings on my Datsun 521.
__________________
alabama_lowlife is offline   Reply With Quote
Thanked by:
mklotz70 (06-16-2022)
Old 06-16-2022, 03:48 AM   #3
EF2
 
EF2's Avatar
 
Join Date: Jan 2015
Location: colorado
Posts: 409
Vehicle: 94 king cab
Thanks: 32
Thanked 90 Times in 70 Posts
Default

holy shit those are pricey, damn nice looking though.
EF2 is offline   Reply With Quote
Old 06-16-2022, 08:14 AM   #4
mklotz70
 
Join Date: Nov 2010
Location: Gresham, OR
Posts: 26
Vehicle: was '64 NL320
Thanks: 3
Thanked 9 Times in 5 Posts
Default

Yep....they're not cheap. If I remember right, the only other sets available a couple of years ago were $650 with no ball joints. That's before most of the materials and supplies nearly doubled in price. Some have more than doubled. From what I've heard, the other guy isn't making them....at least not at this time. These will come with MOOG ball joints and the wrench to install them.
mklotz70 is offline   Reply With Quote
Old 06-25-2022, 10:12 AM   #5
mklotz70
 
Join Date: Nov 2010
Location: Gresham, OR
Posts: 26
Vehicle: was '64 NL320
Thanks: 3
Thanked 9 Times in 5 Posts
Default

I've decided the group buy will close July 20th. There were 32 people on the list, I've heard back from 4. So far, it's looking like the last time I made these......lots of interest until it got real. I thought about starting a build thread on this forum to share the process, but I figure that most people have IG or FB and can follow along there if they want. bluehandsvideo for both of them. Time to hit the shop.
mklotz70 is offline   Reply With Quote
Old 07-25-2022, 03:05 AM   #6
Project510
 
Project510's Avatar
 
Join Date: Sep 2018
Location: Fremont, Ca
Posts: 151
Vehicle: 1997 D21
Thanks: 134
Thanked 39 Times in 32 Posts
Default

I sent a message on the website. Had a few questions. They look nice
__________________
Project510 is offline   Reply With Quote
Thanked by:
mklotz70 (07-25-2022)
Old 07-25-2022, 12:42 PM   #7
mklotz70
 
Join Date: Nov 2010
Location: Gresham, OR
Posts: 26
Vehicle: was '64 NL320
Thanks: 3
Thanked 9 Times in 5 Posts
Default

Thought I'd let people here know that the price has been lowered to $650 and the deadline for deposits is 7/30/22. Check the link at the start. I've updated the info on the site. I will not be making as many as originally planned. I'm going to be losing money on all the parts I've bought, but I don't want to lose my time making parts that aren't wanted. After the 30th, I'll look at how many I need to make to cover those orders and decide if I'm making any extra or not. There's a good chance I may not make any extras.
mklotz70 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:29 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.