Go Back   Infamous Nissan - Hardbody / Frontier Forums > Model Specific > Hardbody Forum (D21)

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-18-2020, 07:51 PM   #1
Join Date: Nov 2019
Location: Whitewater, CO
Posts: 73
Vehicle: 86 2wd 720, 86 4x4D21
Thanks: 0
Thanked 6 Times in 6 Posts
Default 3.0 V6 pvc hose

I am working on my Quest mini-van. It has the 3.0 V-6, very similar to one the D-21 has. I am changing the timing-belt. There is a by bypass hose that goes from the WP to the top Rad hose...anybody had trouble w/dat? Twas a beastie to get the clamps off of. Azone has it for 14 bucks...no problem there. I am not putting those spring clamps back on, you betcha.

There is a 1/2', or so pvc hose, it comes from the valve cover, and makes a 90deg. turn, right over the cover. It has about a 3" hose w.the 90 deg turn on the top. That tells me that if you replace it w/regular hose, it will kink. Anybody ever found one of these anywhere? Rockauto and Azone don't have it.

BTW, I didn't find this anywhere...but the crank nut comes off w/a 1 1/8" 6 point socket.
Stinky is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 03:58 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.