125 AMP Nissan quest alternator upgrade - Page 9 - Infamous Nissan

PROFIT KUSTOMS · 03-26-2012, 10:47 AM

So besides minor adjustments a 99 quest alt then right? i got an 87hb but i got the older style alt

Slaminsunfire · 04-16-2012, 03:50 AM

So this alt would work correct

http://www.ebay.com/itm/NEW-ALTERNAT...item439fd1232f

akrophobik_nismo · 04-20-2012, 02:22 PM

Ok, I've done a search, and I've read this thread... Does anyone know if this will work on a 93 v6 hb?

jwc1080 · 08-03-2012, 09:55 AM

I used a 02 125a Villager alt. I did have to cut a little of the backside of the front mounting bracket. But I also had to cut about the same amount off front of the top bracket where you tighten the bolt to lock the alt in place for the alt to slide behind the bracket. And my stock bracket is about a quater of an inch to high. Anyone else have this prob? I guess I'm going to cut and reweld my bracket where I need it to be.

BigJussin · 08-24-2012, 08:09 PM

having issues with the right size lock washer behind the HB pulley. I have tried all sizes from 5/8 to 1" and it just locks down when tightened...what am I doing wrong?

254chamorro · 03-23-2013, 11:38 PM

My question is that i have a 97 HB 2.4L and my alternator has mounting holes at 6oclock and 12 o'clock. The quest alternator has 6 o'clock and 2 o'clock from what i see. Am i able to do the swap with the mounting holes in different areas?

wagolove · 07-18-2013, 09:56 AM

Quote:

Originally Posted by akrophobik_nismo

Ok, I've done a search, and I've read this thread... Does anyone know if this will work on a 93 v6 hb?

Xs 2?

ImLoco · 07-25-2013, 09:41 AM

I had to get a new alt this week and found a company in Cali called high amp specialists. check out their eBay listing for you V6 guys.

TommyBoy · 03-11-2014, 10:35 PM

Just a question...

where can i buy a new ka24 alternator pulley?

or will the pulley off a z24i alternator work?

alabama_lowlife · 03-12-2014, 01:05 AM

It will probably work, they're both V belts. You can check at the parts store and see if the belts are the same width.

04-20-2012, 02:22 PM	#83
akrophobik_nismo Join Date: Jun 2009 Location: Nampa, Id. Age: 46 Posts: 110 Vehicle: 93 Nissan HB X-Cab Thanks: 6 Thanked 4 Times in 4 Posts	Ok, I've done a search, and I've read this thread... Does anyone know if this will work on a 93 v6 hb? __________________ 93 VG30 HB X-Cab, bagged, with wishbone 3 link. Current work by CJ at Desired Customs, Nampa, Id.

03-12-2014, 01:05 AM	#90
alabama_lowlife Owner and Administrator Join Date: Sep 2008 Location: New Brockton, Alabama Age: 42 Posts: 10,886 Vehicle: 2012 370Z, 1970 Datsun 521, 1995 Nissan Hardbody x2, 1994 Hardbody Thanks: 1,123 Thanked 2,266 Times in 1,863 Posts	It will probably work, they're both V belts. You can check at the parts store and see if the belts are the same width. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-26-2012, 10:47 AM	#81
PROFIT KUSTOMS Join Date: Aug 2011 Location: I Posts: 708 Vehicle: M Thanks: 14 Thanked 24 Times in 24 Posts	So besides minor adjustments a 99 quest alt then right? i got an 87hb but i got the older style alt

04-16-2012, 03:50 AM	#82
Slaminsunfire Donkey Master Join Date: Dec 2011 Location: Jacksonville Fl Posts: 1,816 Vehicle: 2000 Frontier Thanks: 50 Thanked 205 Times in 185 Posts	So this alt would work correct http://www.ebay.com/itm/NEW-ALTERNAT...item439fd1232f

08-03-2012, 09:55 AM	#84
jwc1080 Join Date: Feb 2012 Location: NC Posts: 56 Vehicle: 93 Hardbody 4x4 Thanks: 0 Thanked 1 Time in 1 Post	I used a 02 125a Villager alt. I did have to cut a little of the backside of the front mounting bracket. But I also had to cut about the same amount off front of the top bracket where you tighten the bolt to lock the alt in place for the alt to slide behind the bracket. And my stock bracket is about a quater of an inch to high. Anyone else have this prob? I guess I'm going to cut and reweld my bracket where I need it to be.

08-24-2012, 08:09 PM	#85
BigJussin Join Date: Feb 2012 Location: Clt, nc Posts: 28 Vehicle: 1996 hardbody ext Thanks: 0 Thanked 0 Times in 0 Posts	having issues with the right size lock washer behind the HB pulley. I have tried all sizes from 5/8 to 1" and it just locks down when tightened...what am I doing wrong?

03-23-2013, 11:38 PM	#86
254chamorro Join Date: Feb 2011 Location: Killeen Posts: 206 Vehicle: Nissan Hardbody 96 Thanks: 4 Thanked 12 Times in 10 Posts	My question is that i have a 97 HB 2.4L and my alternator has mounting holes at 6oclock and 12 o'clock. The quest alternator has 6 o'clock and 2 o'clock from what i see. Am i able to do the swap with the mounting holes in different areas?

07-25-2013, 09:41 AM	#88
ImLoco Join Date: Jul 2009 Location: Killeen Texas Posts: 68 Vehicle: Nissan Frontier 1998 Thanks: 3 Thanked 1 Time in 1 Post	I had to get a new alt this week and found a company in Cali called high amp specialists. check out their eBay listing for you V6 guys.

03-11-2014, 10:35 PM	#89
TommyBoy Join Date: Apr 2011 Location: CT Age: 31 Posts: 132 Vehicle: 1988 D21 Thanks: 14 Thanked 5 Times in 4 Posts	Just a question... where can i buy a new ka24 alternator pulley? or will the pulley off a z24i alternator work?