Go Back   Infamous Nissan - Hardbody / Frontier Forums > Tech Area > Interior & Audio/Video

Reply
 
Thread Tools Display Modes
Old 08-11-2021, 05:29 PM   #1
IrreverentCrawfish
 
Join Date: Aug 2021
Location: Oklahoma
Posts: 10
Vehicle: 1997 Nissan Hardbody King Cab 4x4
Thanks: 14
Thanked 0 Times in 0 Posts
Default Hardbody cab insulation material?

I recently picked up a 1997 Hardbody that I'm building as a daily driver. I don't plan to do anything too fancy audio wise, but I am planning to put a head unit and replace the factory speakers with mid-range aftermarkets. The main upgrade I want to invest in is insulation and sound deadening. These trucks are basically tin cans so I'm thinking proper insulation on the cab walls, roof, floor, and doors will make it a far more enjoyable vehicle for commuting whether I have music on or not. Does anyone know of a good all-around insulation material that helps with vibration damping, road noise blocking, and thermal insulation? I'm especially looking for thermal and road noise isolation because I live in an extreme climate, so I'm thinking Dynamat-type products may not cut it on their own.
IrreverentCrawfish is offline   Reply With Quote
Old 08-11-2021, 05:56 PM   #2
91nissan94
 
91nissan94's Avatar
 
Join Date: Sep 2008
Location: Crescent City FL
Posts: 1,749
Vehicle: 91nissan hb
Thanks: 106
Thanked 254 Times in 225 Posts
Default

Noico 80 mill sound deadening from amazon. 36 sqft for $65. I did almost everwhere in my single cab and still had some left over. The doors and roof made a huge difference. Well worth the time and effort.
91nissan94 is offline   Reply With Quote
Old 08-11-2021, 06:13 PM   #3
Deerhurst
4/86 SE-V6 2 tone 4x4 HB
 
Deerhurst's Avatar
 
Join Date: Apr 2013
Location: Oregon
Posts: 8,048
Vehicle: 1986.5 SE-V6 4WD D21, 2003 Audi A4 Avant 3.0 Quattro
Thanks: 917
Thanked 1,082 Times in 977 Posts
Default

Most sound dediner is the same.



Doors will make the largest impact followed by the roof and floor.



I wonder if Nissan did changes to their sound dedining over the years. My truck is pretty quiet inside, not as quiet as my Audi where I can hardly hear my own horn but it's not bad.
__________________
1986.5 SE-V6 4X4 D21 Hardbody
Pacesetter Long Tube Headers
Morimoto Mini D2S HID Projectors and Hella 500s
VG33i
Deerhurst is offline   Reply With Quote
Old 08-12-2021, 12:46 AM   #4
dvdswan
Super Moderator
 
dvdswan's Avatar
 
Join Date: Mar 2009
Location: Port Orchard, WA
Posts: 5,687
Vehicle: 96 HB
Thanks: 214
Thanked 907 Times in 792 Posts
Default

Welcome to the site.
__________________
Dave
96 HB XE
SAS'd D44 3-link on 35s
http://www.cardomain.com/ride/2618002
dvdswan is offline   Reply With Quote
Old 08-12-2021, 05:25 PM   #5
OldGreyBeast
1986.5 HB 4x4 3.0V6
 
OldGreyBeast's Avatar
 
Join Date: Mar 2012
Location: North AL
Age: 34
Posts: 4,088
Vehicle: '86.5 Nissan D21, '87 Mercedes 190D Turbo, '10 Mercedes E350 AWD, '16 Suzuki GSXS1000
Thanks: 425
Thanked 540 Times in 464 Posts
Default

I used Stinger Roadkill adhesive deadener all over the floors, doors, rear cab wall, and roof of my truck. Made a huge difference in the "tinny" noise. I also put Roadkill foam deadener all along the floor. That made an enormous difference in engine/road noise.


Adhesive - https://www.amazon.com/Stinger-RKX36...789024&sr=8-10


Foam - https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1


EDIT: I forgot, I also put thermal tape down first before putting the adhesive deadener down along the area the exhaust goes near and over the transmission tunnel. It might be more effective put underneath the cab rather than on the inside, but I didn't feel like trying to clean all that. https://www.amazon.com/gp/product/B0...e?ie=UTF8&th=1
__________________
Build log for the Beast - https://beastbuildlog.blogspot.com - Last Updated 8 MAR 2021
1986.5 FSM GI section - https://imgur.com/gallery/mjT18bV

OldGreyBeast is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:20 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.