Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (
-   Hardbody Forum (D21) (
-   -   AC Belt Tensioner Part is Missing (

kenmack 12-29-2020 09:39 PM

AC Belt Tensioner Part is Missing
1 Attachment(s)
I found that my AC belt tensioner had fallen off and am now ready to replace the pulley. I have recovered all the parts except the nut and spacer (11931). I cannot find the spacer at any of my parts sources so I was wondering if I could use something as a substitute. Any recommendations of where to find a replacement or how to substitute?

LugNut1990 12-29-2020 10:24 PM


LugNut1990 12-29-2020 10:25 PM

Or maybe your local auto A/C repair shop might have spares on cores.

rbourgeo 12-29-2020 10:53 PM

But given that it’s just a nut and spacer, you should e able to find something at Home Depot to fit?

kenmack 12-30-2020 12:42 AM

I got a nut at Autozone and some washers too. It's hard to tell from the parts diagram just what exactly is the shape of the spacer. I saw two conflicting images during my search. I put a washer where the spacer was supposed to be but when I installed the pulley, it would not turn freely. It seemed to be rubbing the pulley bracket so I put a washer between it and the next piece (11932). Everything turned fine then and when the old, cut belt was laid in all three pulleys, it looked to be straight. I suppose I'll run with it like this unless anyone sees a fault.

david29 12-30-2020 09:42 PM

I got the whole assembly complete.

All times are GMT. The time now is 11:52 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.