Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   Engine and Drivetrain (http://www.infamousnissan.com/forum/forumdisplay.php?f=16)
-   -   Found my 36mph vibration! (http://www.infamousnissan.com/forum/showthread.php?t=45107)

Scott Turchin 02-04-2021 03:34 AM

Found my 36mph vibration!
 
Damn it's been a LONG 3 months chasing this thing.
I've changed bearings out twice, and last time on teh passenger side I found the grease seal spring (in addition to the existing seal/spring) on the spindle.
I had already done drivers side and the clip went on, passenger side it did not.


But I still had the vibration so tonight I tore the drivers side back off, and was dissappointed I did not find it - initially.....cleaned that spindle and kept feeling and VOILA.............


I know who did this and I will never take my truck back there, but if it was me it was a hard lesson learned....but $3000 later and everything on my truck is smooth as GLASS now....every suspension component, driveshaft, everything....just a few minor things under the hood and she's good as new.


https://i.imgur.com/czmd2cm.jpg

PorknBeans 02-04-2021 05:46 AM

Is that a pinched o-ring?!

SBJ 02-04-2021 06:00 AM

It's always the little things that fall through the cracks, isn't it? Glad it ended up being something simple.

amdilligaf1 02-04-2021 03:55 PM

Quote:

Originally Posted by Scott Turchin (Post 545037)

Damn it's been a LONG 3 months chasing this thing.

everything on my truck is smooth as GLASS now...just a few minor things under the hood and she's good as new.

:dathumb: good job! "...and she's good as new"

hard to believe that was it. most people would've let that vibration become a shudder, if they noticed it at all. (ex-wife)

jp2code 02-04-2021 06:35 PM

Mine still has an issue. Can I bring it to you?

Scott Turchin 03-03-2021 04:36 AM

Yeah...but.....Mine in the end turned out the Transfer Case was shot, u-joints installation issue (I'm guilty)....that mistake cost me $3500 and the truck is in very good hands...All About Transmissions in Bremerton, good guys.

dvdswan 03-03-2021 03:04 PM

Quote:

Originally Posted by jp2code (Post 545060)
Mine still has an issue. Can I bring it to you?

It'll cost you 4K. He's starting a business. :dathumb:


All times are GMT. The time now is 05:06 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.