Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   Wheels and Tires (http://www.infamousnissan.com/forum/forumdisplay.php?f=50)
-   -   20" chevy wheels on my Hardbody? (http://www.infamousnissan.com/forum/showthread.php?t=36945)

LongBedTed 02-25-2016 10:54 PM

20" chevy wheels on my Hardbody?
 
Ok so i found this set of 20" chevy wheels on CL for a great price. I have a few questions, will i have to do anything to the wheel to allow it to fit like the TItan wheels where you have to bore it out 4"? I am stock height, planning on doing a 3/3 drop, will i have to do anything besides the normal pathy fenders up front and rolling fenders out back. The wheels are really nice looking so i'd like to put them on if possible. Thanks -Ted

Heres a pick of them

http://i1283.photobucket.com/albums/...psibifd0gz.jpg

Hardbody92 02-26-2016 12:18 AM

Yes you will have to bore them out. Honestly I'd get a 4" hole saw to bore them out. I used one on my wheels, just bore out a scrap piece of plywood first and then bolt it on the back of the wheel and that's that.
http://f.cl.ly/items/1E1S2A3T1X0e2I2i2N2j/image.png

Hardbody92 02-26-2016 12:26 AM

To all you people that can rewire a harness or fabricate a complete race chassis but have to pull their pants down and get charged 150 per wheel at a machine shop to bore their wheels out, this isn't to complicated and it's cheap.

alabama_lowlife 02-26-2016 03:25 AM

Who paid $150 a wheel? Lol I paid $100 for the whole set. Can't use a hole saw on Titan wheels, there is not a large center cap to allow you to cut all the way through. Have to use a router or go to a machine shop. But you can use the hole saw method with the Chevy wheels.

LongBedTed 02-26-2016 04:55 AM

oh wow thats a good idea. i can still put the lug nut cover back over even with the center cut out?

Hardbody92 02-26-2016 10:00 PM

Here's what you got to do: 1).set the 4" hole saw over the center of the wheel, center it about where you think it's centered.
2).Using a sharpie mark the outline of the hole saw, remove the hole saw and see if the gap from the 3" O.E bore looks even all the way around from the outline you drew using the hole saw.
3). If the line looks off a bit erase it using acetone or lacquer thinner
4). Use automatic fluid in a empty mustard bottle to lubricate the cutter as you cut away!

Hardbody92 02-26-2016 11:20 PM

Quote:

Originally Posted by LongBedTed (Post 449804)
oh wow thats a good idea. i can still put the lug nut cover back over even with the center cut out?

Oh boy:facepalm: your not going to able to do this
And to answer your question, YES you can still put the cover over the center like normal

LongBedTed 02-27-2016 01:00 PM

I actually found these Police Tahoe wheels locally for $100! I picked em up yesterday, wondering about what size tire i can run up front. like i said im planning on a 3 inch drop, so would a 225/40 or 235/40 work without rubbing (In the front)?

LongBedTed 02-27-2016 01:01 PM

They are 18x8

http://i1283.photobucket.com/albums/...psscuxyc2g.jpg

Gordo78 02-28-2016 04:35 PM

Quote:

Originally Posted by LongBedTed (Post 449873)
They are 18x8


You sure? I thought that style wheel was a 17...


All times are GMT. The time now is 12:39 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.