PDA

View Full Version : Dash swap nissan hardbody from 87 to 94 dash?


Andrew468290
09-29-2017, 03:55 AM
Will it fit bolt and go or is there anything special have to be done i know inneed the dash mount as well as the 94 dash parts and stuff thanks lmk

alabama_lowlife
09-29-2017, 12:47 PM
Yes. Get all the brackets and ducts from the donor truck. Get the connectors and several inches of wire from each component.

86.5KC
09-29-2017, 12:47 PM
Here is the place you will need to start.--> http://www.infamousnissan.com/forum/showthread.php?t=20642&highlight=ronnie%27s+dash+swap

Yes you will need the metal sub structure from the new dash. It does bolt in using the factory holes.
I have done it in my 86.5 and it all fits and works like factory, physically. You will need to solder in all the new wiring for the dash cluster and some of the accessories(hazard flasher) etc.
Good luck.

Andrew468290
09-29-2017, 02:19 PM
So when u say a couple inches of wire do you mean the wire that goe to the cluster will all that plug in together the new 94 dash plug in to the 87 dash wires thanx lmk

alabama_lowlife
09-29-2017, 04:39 PM
No it does not plug up. You have to splice on the new style connectors to the old wiring. http://www.infamousnissan.com/forum/showthread.php?t=20642

david29
11-16-2017, 12:36 AM
Dont get the metal bracketry from a 96-97 truck. The dash itself and ducting is ok to get. The steering column bracket can only be used from a 94-95 Hardbody or pathfinder only.