Go Back   Infamous Nissan - Hardbody / Frontier Forums > Tech Area > Performance and Drifting

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-27-2018, 11:41 PM   #1
Espman
 
Join Date: Mar 2018
Location: Calgary
Posts: 4
Vehicle: 1987 D21
Thanks: 0
Thanked 0 Times in 0 Posts
Default Trying to find rotors

I have a 87 D21, and managed to get my hands on some R32 GTR front calipers, and have had absolutely zero luck finding a rotor that fits correctly (291mm). The largest I've been able to find that will bolt on to the stock type spindle is 276mm. Has anyone ever done the GTR swap? If so, what did it take to make it functional?

*edit for a status update*
I ordered the 276mm v6 4x4 D21 rotors, and despite what I was able to find online, they don't fit my stock hubs (rear drive Z24 XE). So now I'm looking at upgrading the hubs (if possible to something I can get a bit closer to that magic 291mm rotor diameter). But still want to maintain the OEM bolt pattern and hub bore. What's out there that would work for that? I'd spend more time looking up the info myself, but have almost no free time lately.

Last edited by Espman; 06-07-2018 at 01:29 AM.
Espman is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:20 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.