Go Back   Infamous Nissan - Hardbody / Frontier Forums > Tech Area > Engine and Drivetrain

Reply
 
Thread Tools Display Modes
Old 04-02-2018, 07:49 PM   #1
eggert8
 
Join Date: Apr 2018
Location: Tennessee
Posts: 1
Vehicle: 1995 4x4 pickup
Thanks: 2
Thanked 0 Times in 0 Posts
Default FS5W71c Transmission

Let me start by saying I Am Not A Mechanic. Honestly I know very little about mechanic work. First I thought my throw out bearing was going out so I had someone put in a new one as well as clutch. Seems that isn't the issue. A friend of mine who does work on vehicles told me it sounds more like the input shaft(?) or bearing. If that is the case I figured it's probably just as easy to replace the entire transmission. With that being said from what I can see by hunting around on the net is that the FS5W71c was used in several different Nissans. Could anyone tell me what other vehicles so I can find one to swap it with. Seems there aren't that many 95 4x4's in the junkyards around here. I really like my truck and don't want to let it go. I have a 1995 4 cylinder XE truck with 306000 miles on it. Any help would be great. Also I got the info for it being a FS5W71c by calling a Nissan dealer and they used the vin# to find that out. Thanks a million !!!
eggert8 is offline   Reply With Quote
Old 04-02-2018, 08:27 PM   #2
YEPEE
 
Join Date: Mar 2013
Location: Phoenix
Posts: 1,577
Vehicle: 86.5 HB, 02 Sentra Spec-V
Thanks: 164
Thanked 237 Times in 206 Posts
Default

may want to ask your friend about replacing the brg, might be cheaper
take a peek in the "hardbody" section"rebuilding FS5W71C", brandonodo18 might be able to help..

Last edited by YEPEE; 04-02-2018 at 09:06 PM.
YEPEE is offline   Reply With Quote
Thanked by:
eggert8 (04-03-2018)
Old 04-03-2018, 02:52 PM   #3
Alexg89
 
Alexg89's Avatar
 
Join Date: Jun 2015
Location: Cocoa
Posts: 138
Vehicle: 1995 hardbody ext cab ka 2wd 1998 Frontier ext ka 4wd 2007 D40 CC 4wd w/2in leveling kit
Thanks: 34
Thanked 14 Times in 12 Posts
Default

Replacing the input shaft bearing is an easy enough task if you know how to take things apart and put them back together , couple bolts that hold on the front cover, a snap ring and then the bolts in the center to hold the bellhousing on .. once its off and the snap ring is out with an air hammer she comes right off.. had the pleasure of doing mine a few times lol
__________________
Daily - 2007 Nissan frontier crew can 4wd , first truck/project - 1995 King can 2wd , mud truck - 1998 frontier ext can 4wd owned: 1991 single can 2wd, 1994 ext can 2wd, 1985 720 4wd, 2000 crew can 2wd v6
Alexg89 is offline   Reply With Quote
Thanked by:
eggert8 (04-03-2018)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:51 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.