Nissan WD21 Supercharged Pathfinder Pickup Build - Page 17 - Infamous Nissan

Deerhurst · 07-22-2020, 01:12 AM

Quote:

Originally Posted by PoBoi850

Besides the fenders, what else is different about the two front clips?

Even the fenders are the same. Same as the 4x4.

89'HBV6 · 07-22-2020, 01:37 AM

Quote:

Originally Posted by Hardbody92

https://tampa.craigslist.org/pnl/pts...150015568.html

Quote:

Originally Posted by Xterra Frontier Pathfinder 3.3L Supercharger Pulley Manifold ECU Inj - $950 (clearwater)

LOCAL PICK UP, ONLY NO SHIPPING, NO SHIPPING, NO SHIPPING

OK, so who lives in the Tampa/St Pete area?

PoBoi850 · 07-22-2020, 02:23 PM

Quote:

Originally Posted by Deerhurst

Even the fenders are the same. Same as the 4x4.

I only ask, because, I hear of people swapping hoods, and or other Pathy parts to their HB. Even on this thread. Some people say the HB front looks weird on the Pathy, and vice versa.

Quote:

Originally Posted by Thickfreakness

For some reason the D21 front on it just seems kind of awkward to me but more power to ya! Could be a different story though when it's all together. D21 door mirrors too? Lol

Foul_Mouth · 09-09-2020, 01:14 PM

Got the transmission crossmember and mount fully installed. Required leaving all the bolts loose and using a drift to get everything lined up. Everything is good now.

Chopped a huge hole in the hood to make heat vents. The holes came out fine, still need a louver panel to rivet on...soon!

david29 · 09-09-2020, 04:05 PM

Quote:

Originally Posted by Foul_Mouth

Got the transmission crossmember and mount fully installed. Required leaving all the bolts loose and using a drift to get everything lined up. Everything is good now.

Chopped a huge hole in the hood to make heat vents. The holes came out fine, still need a louver panel to rivet on...soon!

My thoughts at one point when I was building my 4wd was to use 240z hood vents as they are functional.

Foul_Mouth · 09-09-2020, 05:35 PM

Here's what I did. I think a one piece louver panel will keep crap out and keep under hood temps down.

Foul_Mouth · 01-05-2021, 01:11 AM

2 days ago.

89'HBV6 · 01-05-2021, 01:39 AM

Where's the rad?

Foul_Mouth · 01-05-2021, 02:17 AM

Not installed yet. Lots to still do before that happens.

89'HBV6 · 01-05-2021, 02:29 AM

LOL I know, just yankin' da-chain! (o:

Are you gonna have room up front? ....or rear mount?

09-09-2020, 01:14 PM	#164
Foul_Mouth Pounding Rox Truck Join Date: Mar 2010 Location: Western NY Posts: 4,662 Vehicle: 1986.5 4WD Reg Cab/ 1991 2WD Reg Cab(Red)/ 1995 2WD Reg Cab(Green)/ 92 WD21 4WD PathFinder Thanks: 537 Thanked 805 Times in 642 Posts	Got the transmission crossmember and mount fully installed. Required leaving all the bolts loose and using a drift to get everything lined up. Everything is good now. Chopped a huge hole in the hood to make heat vents. The holes came out fine, still need a louver panel to rivet on...soon! __________________ Nissan Truck Videos (Builds-Racing-Shows-Tech) https://www.youtube.com/c/NissanTruckguy IG@ rainmaker_d21

09-09-2020, 05:35 PM	#166
Foul_Mouth Pounding Rox Truck Join Date: Mar 2010 Location: Western NY Posts: 4,662 Vehicle: 1986.5 4WD Reg Cab/ 1991 2WD Reg Cab(Red)/ 1995 2WD Reg Cab(Green)/ 92 WD21 4WD PathFinder Thanks: 537 Thanked 805 Times in 642 Posts	Here's what I did. I think a one piece louver panel will keep crap out and keep under hood temps down. __________________ Nissan Truck Videos (Builds-Racing-Shows-Tech) https://www.youtube.com/c/NissanTruckguy IG@ rainmaker_d21

01-05-2021, 01:11 AM	#167
Foul_Mouth Pounding Rox Truck Join Date: Mar 2010 Location: Western NY Posts: 4,662 Vehicle: 1986.5 4WD Reg Cab/ 1991 2WD Reg Cab(Red)/ 1995 2WD Reg Cab(Green)/ 92 WD21 4WD PathFinder Thanks: 537 Thanked 805 Times in 642 Posts	2 days ago. __________________ Nissan Truck Videos (Builds-Racing-Shows-Tech) https://www.youtube.com/c/NissanTruckguy IG@ rainmaker_d21

01-05-2021, 02:17 AM	#169
Foul_Mouth Pounding Rox Truck Join Date: Mar 2010 Location: Western NY Posts: 4,662 Vehicle: 1986.5 4WD Reg Cab/ 1991 2WD Reg Cab(Red)/ 1995 2WD Reg Cab(Green)/ 92 WD21 4WD PathFinder Thanks: 537 Thanked 805 Times in 642 Posts	Not installed yet. Lots to still do before that happens. __________________ Nissan Truck Videos (Builds-Racing-Shows-Tech) https://www.youtube.com/c/NissanTruckguy IG@ rainmaker_d21

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-05-2021, 01:39 AM	#168
89'HBV6 Ol'school Geek Join Date: Mar 2020 Location: Washington State Posts: 183 Vehicle: 89' D21 KingCab SE V6 5spd 2WD - 87' D21 KingCab SE V6 5spd 2WD Thanks: 212 Thanked 52 Times in 43 Posts	Where's the rad?

01-05-2021, 02:29 AM	#170
89'HBV6 Ol'school Geek Join Date: Mar 2020 Location: Washington State Posts: 183 Vehicle: 89' D21 KingCab SE V6 5spd 2WD - 87' D21 KingCab SE V6 5spd 2WD Thanks: 212 Thanked 52 Times in 43 Posts	LOL I know, just yankin' da-chain! (o: Are you gonna have room up front? ....or rear mount?