Go Back   Infamous Nissan - Hardbody / Frontier Forums > Model Specific > Hardbody Forum (D21)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-12-2018, 03:59 AM   #21
SBJ
Total Buzzkill
 
Join Date: Nov 2016
Location: OR
Posts: 1,410
Vehicle: '90 D21 4cyl 5spd 2wd
Thanks: 156
Thanked 153 Times in 141 Posts
Default

As stated earlier the water pump is really easy to change on these. Once you get the fan and the pulley off there are 5 identical 12mm bolts holding the pump to the timing cover. A few tips you might find helpful:

Loosen the 4 nuts holding the fan clutch on before undoing the accessory belt. It'll make it easier to hold the pulley still while you break torque.

If everything is still factory the water pump and thermostat housing will be sealed with RTV instead of an actual gasket. Make sure to get the mating surface nice and clean or it'll leak afterwards. Aftermarket gaskets are the way to go IMHO.

Might as well do the thermostat too while you're at in there; it's right next door.
SBJ is online now   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:50 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.