Go Back   Infamous Nissan - Hardbody / Frontier Forums > Site Info > FAQs and General Info

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-22-2017, 06:06 AM   #1
Tilitdyze87
 
Join Date: May 2017
Location: Saskatoon
Posts: 8
Vehicle: 1987 Nissan D21 Kingcab
Thanks: 2
Thanked 0 Times in 0 Posts
Smile 1987 d21 kingcab driveshaft issue

Hi there! First time caller, long time listener here. I have a 1987 D21 Kingcab with the 2.4 Z24 engine and a standard tranny. My problem here is I need to replace the front half of the 2 piece drive shaft due to a worn out yoke. Apparently, only a 1986 or 1987 shaft from a longbox or Kingcab model will work as the companion flage on these years have a slightly different size bolt pattern/size that mates with the ujoint flange on the rear shaft. So my question is....can I use the short shaft from another year truck (eg.'88-'93) and just replace that companion flange with my own 1987 one? It seems that it is just the one nut that holds it on and if they can be interchangeable, it would save me a lot of time trying to track down either the aforementioned '86/'87 shaft. Has anyone tried this with success?
Thanks bunches
Tilitdyze87 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:04 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.