My 1st bagged truck !!!! - Infamous Nissan

IndecentXxXposur · 05-23-2009, 10:40 AM

Well i figured i'd post some build pics..there is alot goin on so feel free to comment and give some ideas and opinions cause this is my 1st truck...this is the truck before anything was done....

this is how i got the truck..if you notice the tow straps holding the frame together..the frame ( made out of the thinest pipe they could find i guess) is broke on both sides right on top of the rear end

here is the frame now rebuilt with something a lot better...still got some wleding and grinding to do on it

i started over with a new bed..ima leave as much of the bed floor in as i can.right now im just fixin dents and dings and takin the body lines out(yeah no body lines some people thing im stupid some don't but i guess thats y people build trucks they like not what every1 else likes right?) plus doin caddy lights and a skin

here is a side view of the cab now...im suicidin tha doors and fixin to take the whole thing to bare metal to try and get as much bondo out as i can(there is gallons)

put this on a week or so i guess

here is just some other pics i took...excuse tha hood prop haha

GutterHXCGrowl · 05-23-2009, 09:58 PM

Looks good man! You def gotta keep that wheel and tire combo.

nis720 · 05-23-2009, 10:27 PM

what axle are you running? it looks narrower than stock. I like how the prowler wheels look on it.

GutterHXCGrowl · 05-23-2009, 11:09 PM

That's a shortened 9 inch, I believe. That or a yota axle shortened, but I say 9 inch because of the drum size.

IndecentXxXposur · 05-23-2009, 11:43 PM

yea it a ford 9 inch..it had some crazy ass gear in it if i had the motor i bet i could have went 300 mph it was insane but i got a new chunk to go in it now and i have a 4.3 vortech v6 out of a 96 s10 that is being built now w/5 speed ima try and put off in it

GutterHXCGrowl · 05-23-2009, 11:47 PM

Good, was hoping to see a 4.3 swap in a hb soon.

I wanna see somebody make a nissan cyclone clone. heh

IndecentXxXposur · 09-27-2009, 01:11 AM

Well here are some of the newest pics of the nissan i got some more build pics just gotta get em but i'll get em but for now here is what is goin on with it ok....this is a pic from the Relaxed Atmosphere All Star Event

and so is this

the rest of the pics are cell phone pics and there really small so i ain't putting them on here but i will when i get my camera back

$krap_IN_flesh · 09-27-2009, 02:35 AM

if your turboin it then I suggest a 240 intake to make it look nice and clean

alabama_lowlife · 09-27-2009, 02:52 AM

looking good. try hitting the enter key before and after you put a pic in a thread....it'll keep your posts from being all messed up looking and hard as hell to read.

IndecentXxXposur · 09-27-2009, 06:32 AM

well if i would of had something interesting to say i prolly would have but i wuz just puttin pics up...when ever i put build pics up and alot of them i'll make sure its readable then..but now it wuz just to put some new pics up

05-23-2009, 10:40 AM	#1
IndecentXxXposur TWIZTEDRockstaR Join Date: Dec 2008 Location: Cullman Alabama Age: 37 Posts: 573 Vehicle: Nissan Hardbody 1989 Thanks: 0 Thanked 1 Time in 1 Post	My 1st bagged truck !!!! Well i figured i'd post some build pics..there is alot goin on so feel free to comment and give some ideas and opinions cause this is my 1st truck...this is the truck before anything was done.... this is how i got the truck..if you notice the tow straps holding the frame together..the frame ( made out of the thinest pipe they could find i guess) is broke on both sides right on top of the rear endhere is the frame now rebuilt with something a lot better...still got some wleding and grinding to do on iti started over with a new bed..ima leave as much of the bed floor in as i can.right now im just fixin dents and dings and takin the body lines out(yeah no body lines some people thing im stupid some don't but i guess thats y people build trucks they like not what every1 else likes right?) plus doin caddy lights and a skin here is a side view of the cab now...im suicidin tha doors and fixin to take the whole thing to bare metal to try and get as much bondo out as i can(there is gallons) put this on a week or so i guesshere is just some other pics i took...excuse tha hood prop haha

05-23-2009, 10:27 PM	#3
nis720 Join Date: Sep 2008 Location: Compton CA Posts: 1,065 Vehicle: 86' Nisssan 720 / 06' Silverado Thanks: 1 Thanked 24 Times in 22 Posts	what axle are you running? it looks narrower than stock. I like how the prowler wheels look on it. __________________ http://www.cardomain.com/id/nis720 http://www.youtube.com/nis720 All anybody wants is a normal life and a cool car... most people settle for the car - Titus.

09-27-2009, 02:35 AM	#8
$krap_IN_flesh Duey the MOD Join Date: Sep 2008 Location: California, PA Age: 44 Posts: 4,385 Vehicle: nissan hardbody 1991 Thanks: 51 Thanked 133 Times in 120 Posts	if your turboin it then I suggest a 240 intake to make it look nice and clean __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-23-2009, 09:58 PM	#2
GutterHXCGrowl Join Date: Sep 2008 Location: Brownsville PA Age: 33 Posts: 246 Vehicle: 86.5 Nissan Hardbody, 91 Mercury Capri XR2 Thanks: 0 Thanked 1 Time in 1 Post	Looks good man! You def gotta keep that wheel and tire combo.

05-23-2009, 11:09 PM	#4
GutterHXCGrowl Join Date: Sep 2008 Location: Brownsville PA Age: 33 Posts: 246 Vehicle: 86.5 Nissan Hardbody, 91 Mercury Capri XR2 Thanks: 0 Thanked 1 Time in 1 Post	That's a shortened 9 inch, I believe. That or a yota axle shortened, but I say 9 inch because of the drum size.

05-23-2009, 11:43 PM	#5
IndecentXxXposur TWIZTEDRockstaR Join Date: Dec 2008 Location: Cullman Alabama Age: 37 Posts: 573 Vehicle: Nissan Hardbody 1989 Thanks: 0 Thanked 1 Time in 1 Post	yea it a ford 9 inch..it had some crazy ass gear in it if i had the motor i bet i could have went 300 mph it was insane but i got a new chunk to go in it now and i have a 4.3 vortech v6 out of a 96 s10 that is being built now w/5 speed ima try and put off in it

05-23-2009, 11:47 PM	#6
GutterHXCGrowl Join Date: Sep 2008 Location: Brownsville PA Age: 33 Posts: 246 Vehicle: 86.5 Nissan Hardbody, 91 Mercury Capri XR2 Thanks: 0 Thanked 1 Time in 1 Post	Good, was hoping to see a 4.3 swap in a hb soon. I wanna see somebody make a nissan cyclone clone. heh

09-27-2009, 01:11 AM	#7
IndecentXxXposur TWIZTEDRockstaR Join Date: Dec 2008 Location: Cullman Alabama Age: 37 Posts: 573 Vehicle: Nissan Hardbody 1989 Thanks: 0 Thanked 1 Time in 1 Post	Well here are some of the newest pics of the nissan i got some more build pics just gotta get em but i'll get em but for now here is what is goin on with it ok....this is a pic from the Relaxed Atmosphere All Star Event and so is this the rest of the pics are cell phone pics and there really small so i ain't putting them on here but i will when i get my camera back

09-27-2009, 02:52 AM	#9
alabama_lowlife Owner and Administrator Join Date: Sep 2008 Location: New Brockton, Alabama Age: 42 Posts: 10,873 Vehicle: 2012 370Z, 1970 Datsun 521, 1995 Nissan Hardbody x2, 1994 Hardbody Thanks: 1,123 Thanked 2,259 Times in 1,856 Posts	looking good. try hitting the enter key before and after you put a pic in a thread....it'll keep your posts from being all messed up looking and hard as hell to read.

09-27-2009, 06:32 AM	#10
IndecentXxXposur TWIZTEDRockstaR Join Date: Dec 2008 Location: Cullman Alabama Age: 37 Posts: 573 Vehicle: Nissan Hardbody 1989 Thanks: 0 Thanked 1 Time in 1 Post	well if i would of had something interesting to say i prolly would have but i wuz just puttin pics up...when ever i put build pics up and alot of them i'll make sure its readable then..but now it wuz just to put some new pics up