Weather strip/window seal

[kellybig]

The 1st one from eBay is the interior door seal. If you want the exterior go to eBay and Google window rubber channel run. Second one looks right. Just make sure fits your year. If your looking for door seals 1st one is right

[Tropicalcats]

95 D21 is not listed on
https://www.ebay.com/itm/DATSUN-Path...oAAOSwcjhewf-s

But it still should fit Right ?

[jp2code]

Originally Posted by Tropicalcats

95 D21 is not listed on
https://www.ebay.com/itm/DATSUN-Path...oAAOSwcjhewf-s

But it still should fit Right ?

It still fits. The description says 1986 - 1997. It's cumbersome to list all of the individual models for every year for a listing. The seller probably just missed a few.

[mikewalker225]

Originally Posted by swampyankee

Fit is good but you have to pull the doors for door seal.



The window seals also fit well, but you have to trim about a 1/8" off the tails (end at rear of door) on the exterior side .



The interior window seals(scraper) fit fine, but the mounting tangs don't line up with the slots in the top of the door panel. ( I know others have encountered this situation, as have I.) You need to measure, mark and drill new holes in the top of the panel. Use the smallest drill bit you can. The slots in the panel are square, you just need a hole big enough to force the tangs through. Take your time, as the tangs can break.

I second this on the interior. Man oh man does it make the seals tight on my truck though, which is a good thing. I marked and then drilled with a dremel a 1/8" hole. Works perfectly. Just make sure to retro fit everything and run your window up and down a few times.

[YEPEE]

the inner seals, do they offer rt & lt? if the holes are off, wondering if it is a difference in sides.. but if making new holes works...

[swampyankee]

Originally Posted by YEPEE

the inner seals, do they offer rt & lt? if the holes are off, wondering if it is a difference in sides.. but if making new holes works...

There are specific Right and Left panel seals (Scrapers).
I was surprised by the misalignment, and thought maybe I had the wrong side, but the packages are clearly marked, and do have different part numbers. Other than that I was satisfied with the fitment.

[Importfanboy]

https://www.amazon.com/gp/aw/d/B07DL...b_b_prod_image
I ordered these ones off amazon myself, arrived the other night but was two pieces and not four. I think they got my order mixed up with another one, but I can update when/if I get the right set. Hopefully I don’t have to buy another off eBay lol.

[jp2code]

Originally Posted by Importfanboy

https://www.amazon.com/gp/aw/d/B07DL...b_b_prod_image
I ordered these ones off amazon myself, arrived the other night but was two pieces and not four. I think they got my order mixed up with another one, but I can update when/if I get the right set. Hopefully I don’t have to buy another off eBay lol.

Go into your Orders screen, select your item and click the START RETURN button. You can only do this for 90 days.

[Importfanboy]

Originally Posted by jp2code

Go into your Orders screen, select your item and click the START RETURN button. You can only do this for 90 days.

I sent them a message shortly after and said they would send another set. I’ll give it a couple weeks to show up and if it doesn’t I will start that route.

[PWells1122]

I have a question actually.
I have a 1995 Hardbody Truck. I continue to find the side window parts, but they seem to stop at the 1994 model.
Are the doors and seals not the same on 1994 and 1995?
Most of the parts come from Thailand so I do not want to take a chance on having to send them back across the ocean.
Any input on fitment would be a great help.