Axle Differential Codes and Ratios up to 2004 - Page 14 - Infamous Nissan

Deerhurst · 06-24-2018, 06:22 PM

HF35 merely means it is an open diff with a 3.5:1 ratio.

Being a 96 I'd think you have either a C200 or a H233b.

dvdswan · 06-24-2018, 07:55 PM

HF denotes that the axle is a H190 axle, 35 denotes the gear ratio.

with that being said, if you have a diff cover then you have a C200 axle. most likely swapped out by a previous owner.

Quote:

Originally Posted by sammalone

My 96 ext. cab sticker shows HF35 axle. Owner's manual says ext. cab dif. takes 2-3/4pt. Service manual says the only one that takes 2-3/4pt. is the C200. My dif. has the 8 hole cover plate. Am I missing something cause it seems that an earlier post said HF35 means H190?

sammalone · 06-25-2018, 02:33 PM

Quote:

HF35 merely means it is an open diff with a 3.5:1 ratio.

Being a 96 I'd think you have either a C200 or a H233b.
Yesterday 09:55 AM

Looks like I do have the C200 based on my manuals and the diff back cover plate. I wondered about the code because I bought it off my dad (orig. owner) so I'm sure it's the original diff. Thanks for the info.

supersayianjim · 09-24-2018, 08:17 PM

so, help me understand this, I have an 1987 4x4 5 speed pathfinder. I put a rear end from a 1995 4x4 pathfinder, didn't change the front diff. will this cause issues and bind the front if I activate the 4wd drive?

06-24-2018, 06:22 PM	#131
Deerhurst 4/86 SE-V6 2 tone 4x4 HB Join Date: Apr 2013 Location: Oregon Posts: 5,190 Vehicle: 1986.5 Hardbody Thanks: 712 Thanked 487 Times in 450 Posts	HF35 merely means it is an open diff with a 3.5:1 ratio. Being a 96 I'd think you have either a C200 or a H233b. __________________ 1986.5 SE-V6 4X4 D21 Hardbody Pacesetter Long Tube Headers Morimoto Mini D2S HID Projectors and Hella 500s VG33i

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-24-2018, 08:17 PM	#134
supersayianjim ka-t pathy Join Date: Sep 2018 Location: missouri Age: 36 Posts: 69 Vehicle: wd21 pathfinder 1987 Thanks: 6 Thanked 7 Times in 6 Posts	so, help me understand this, I have an 1987 4x4 5 speed pathfinder. I put a rear end from a 1995 4x4 pathfinder, didn't change the front diff. will this cause issues and bind the front if I activate the 4wd drive?