Door lock won't work - Page 2 - Infamous Nissan

friguy · 11-19-2017, 05:12 PM

i have the same problem and was able to get the parts thru my local nissan dealer. Any advise on how to put it together, I have spent numerous hours and can't seem to get it all together

ahardb0dy · 11-19-2017, 07:02 PM

the white part that is hanging I believe should be facing straight up and connect to the other white piece that comes off the door handle

YEPEE · 11-20-2017, 02:31 PM

I am going to give you some oem pt#'s, The white brkt (80552-34A00 rt, 80523-34A00 lt)) maybe brittle, there is a yellow clip (80552-34A00) that is probably the issue, it has a white spreader clip (80534-34A05) that you may also need. Usually if your door cylinder will not operate with a key, the above clips are the issue..

joboy77 · 11-23-2017, 07:31 AM

Here is a video of what you need. I just fixed this tonight.

https://www.youtube.com/watch?v=WvRBr0gxoTc&t=492s

kenmack · 01-24-2018, 02:53 AM

Don't forget to spray some dry lube on the moving parts when you make your repair.

11-19-2017, 07:02 PM	#12
ahardb0dy The Post Count Whore Join Date: May 2014 Location: Sorrento, Florida Age: 52 Posts: 7,293 Vehicle: 2017 Nissan Frontier Desert Runner Thanks: 63 Thanked 825 Times in 764 Posts	the white part that is hanging I believe should be facing straight up and connect to the other white piece that comes off the door handle __________________ My name is Tony and I'm a Infamousaholic Current truck - 2017 Nissan Frontier Desert Runner , (formerly owned: 1993 Nissan Hardbody king cab 2wd, 90 Nissan Sentra, 94 Nissan Pathfinder SE 4x4, 05 Nissan Titan, 87 Nissan SE-V6 4x4 king cab, 94 Infiniti Q45t & 80 Datsun 310GX )

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-19-2017, 05:12 PM	#11
friguy Join Date: Oct 2017 Location: Missouri Posts: 7 Vehicle: 1988 Nissan D21 4x4 Thanks: 0 Thanked 0 Times in 0 Posts	i have the same problem and was able to get the parts thru my local nissan dealer. Any advise on how to put it together, I have spent numerous hours and can't seem to get it all together

11-20-2017, 02:31 PM	#13
YEPEE Join Date: Mar 2013 Location: Phoenix Posts: 1,600 Vehicle: 86.5 HB, 02 Sentra Spec-V Thanks: 165 Thanked 237 Times in 206 Posts	I am going to give you some oem pt#'s, The white brkt (80552-34A00 rt, 80523-34A00 lt)) maybe brittle, there is a yellow clip (80552-34A00) that is probably the issue, it has a white spreader clip (80534-34A05) that you may also need. Usually if your door cylinder will not operate with a key, the above clips are the issue..

11-23-2017, 07:31 AM	#14
joboy77 Join Date: Nov 2017 Location: Surprise, AZ Posts: 21 Vehicle: 1997 Hardbody Thanks: 4 Thanked 1 Time in 1 Post	Here is a video of what you need. I just fixed this tonight. https://www.youtube.com/watch?v=WvRBr0gxoTc&t=492s

01-24-2018, 02:53 AM	#15
kenmack Join Date: Jan 2015 Location: Edgeoftown Posts: 24 Vehicle: Hardbody 1989 Thanks: 0 Thanked 0 Times in 0 Posts	Don't forget to spray some dry lube on the moving parts when you make your repair.