Go Back   Infamous Nissan - Hardbody / Frontier Forums > Model Specific > Hardbody Forum (D21)

Reply
 
Thread Tools Display Modes
Old 03-24-2020, 12:10 AM   #21341
nunya
 
nunya's Avatar
 
Join Date: Apr 2019
Location: Central Florida
Posts: 767
Vehicle: nissan d21 93 kingcab red
Thanks: 236
Thanked 146 Times in 124 Posts
Default Raptor Liner

I hooked 2 small air compressors up to an eleven gallon air tank to get enough CFM to spray consistently. I had bought a 3 liter Raptor Liner Kit. (4)24 oz. bottles of liner, (4) small bottles if red tint, (1) can of hardener and a "schutz" spray gun, and a measuring cup to measure 8 oz. of hardener. Easy to mix. A bit of prep work. Direction call for 2 coats, I had more than enough to do 3 coats and that splash guard that hangs under the engine.



nunya is offline   Reply With Quote
Thanked by:
alabama_lowlife (03-24-2020), mytmouz (03-24-2020), PoBoi850 (03-25-2020), YEPEE (03-24-2020)
Old 03-24-2020, 04:52 PM   #21342
street_rulerr
 
Join Date: Nov 2015
Location: West Coast
Posts: 2,148
Vehicle: 1996 4x4 5spd
Thanks: 0
Thanked 192 Times in 182 Posts
Default

that looks really good. how thick is it after that much material?
street_rulerr is offline   Reply With Quote
Old 03-24-2020, 09:01 PM   #21343
nunya
 
nunya's Avatar
 
Join Date: Apr 2019
Location: Central Florida
Posts: 767
Vehicle: nissan d21 93 kingcab red
Thanks: 236
Thanked 146 Times in 124 Posts
Default

IDK, thick as a matchbook cover?
nunya is offline   Reply With Quote
Old 03-24-2020, 10:24 PM   #21344
Deerhurst
4/86 SE-V6 2 tone 4x4 HB
 
Deerhurst's Avatar
 
Join Date: Apr 2013
Location: Oregon
Posts: 6,656
Vehicle: 1986.5 Hardbody
Thanks: 855
Thanked 754 Times in 687 Posts
Default

Gotta say, you don't like red at all.
__________________
1986.5 SE-V6 4X4 D21 Hardbody
Pacesetter Long Tube Headers
Morimoto Mini D2S HID Projectors and Hella 500s
VG33i
Deerhurst is offline   Reply With Quote
Thanked by:
nunya (03-24-2020)
Old 03-24-2020, 10:30 PM   #21345
nunya
 
nunya's Avatar
 
Join Date: Apr 2019
Location: Central Florida
Posts: 767
Vehicle: nissan d21 93 kingcab red
Thanks: 236
Thanked 146 Times in 124 Posts
Default

Gotta go with the theme.
nunya is offline   Reply With Quote
Thanked by:
Deerhurst (03-25-2020)
Old 03-24-2020, 11:11 PM   #21346
robson1015
 
Join Date: Nov 2019
Location: Ohio
Age: 60
Posts: 74
Vehicle: 1993 Nissan QMD21 (Japanese fire truck)
Thanks: 0
Thanked 12 Times in 12 Posts
Default

Looks Great !
robson1015 is offline   Reply With Quote
Thanked by:
nunya (03-25-2020)
Old 03-25-2020, 12:55 AM   #21347
GaBluD214X4
 
GaBluD214X4's Avatar
 
Join Date: Aug 2018
Location: GA
Posts: 121
Vehicle: Nissan D21 1994
Thanks: 42
Thanked 37 Times in 23 Posts
Default

Nunya... looks awesome.

Put Grover back together after complete front rebuild.
Complete new brakes, shocks, balls joints and steering.
The biggest snafu was the tie rod adjuster. One of the old tie rods won the fight.
Finally said screw this, local AutoZone and brand new adjusters for $20. Should have looked it up instead of fighting for like two hours off and on.
__________________
1994, SWB, Reg Cab, 2.4L, 5SPD, 4X4, Blue/Grey, Chrome Package, Power Mirrors, A/C, Factory Bedliner, Changes so far: 90' model grill and lower valance, 97 3-piece rear window, bucket seats, LEGO wheels with Kumho Road Venture AT51 31x10.50x15, fully Plasti-Dipped submarine blue, all chrome painted iron gray, digital only head unit,
GaBluD214X4 is offline   Reply With Quote
Thanked by:
nunya (03-25-2020)
Old 03-25-2020, 01:16 AM   #21348
nunya
 
nunya's Avatar
 
Join Date: Apr 2019
Location: Central Florida
Posts: 767
Vehicle: nissan d21 93 kingcab red
Thanks: 236
Thanked 146 Times in 124 Posts
Default

Thanks. Yeah, my tie rod adjusters were chewed up and rusty too, when I did my front end I ordered 2 from Oreillys, took 60 bucks and 4 days. DOH!
nunya is offline   Reply With Quote
Old 03-25-2020, 02:08 AM   #21349
SBJ
Total Buzzkill
 
Join Date: Nov 2016
Location: OR
Posts: 2,732
Vehicle: '90 D21 4cyl 5spd 2wd
Thanks: 302
Thanked 463 Times in 415 Posts
Default

Looks good. Now you can hide the bodies in plain sight.

I've been messing around with the new scan tool more in my free time, plus other stuff like making some custom test leads and some lights that I think will do a better job of load testing a circuit. The more I use it the more impressed I am with it. I tried it on a Subaru a couple of weeks ago and while I can scan all the modules the list of functions it supports is quite limited. On the other hand, I've found that for Toyota and GM/Chrysler vehicles it supports pretty much anything you'd need to do short of reprogramming the ECU. Once I spend some more time figuring out its strengths and weaknesses I may start saving up for another one that complements it.
SBJ is offline   Reply With Quote
Old 03-25-2020, 02:30 AM   #21350
PoBoi850
 
PoBoi850's Avatar
 
Join Date: Aug 2019
Location: Tallahassee
Posts: 464
Vehicle: 88 Nissan Truck
Thanks: 155
Thanked 45 Times in 41 Posts
Default

I added a black toolbox. It's cheap plastic and i pulled it out of a neighbors trash heap a few years ago, before i even had this truck, lol. I had to lube up the locking mechanism so it wouldn't fly open going down the road. I plan to use it more for storage space than tools, things I want to keep dry and whatnot. It has a little tray that slides across the top. We'll see how long that lasts.
Toolbox PS.jpg

Last edited by PoBoi850; 03-25-2020 at 08:22 PM.
PoBoi850 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:33 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.