z32 Brake Swap Info - Infamous Nissan

RedT · 02-05-2016, 12:46 AM

Anyone have some info on swapping to z32 brakes completely? Thanks.

Motorhead · 10-04-2016, 02:29 AM

yes happening soon hey lets meet up!!!!!

DysfunctionalVeteranD21 · 11-26-2016, 02:32 AM

Yasss also in longisland! MMMM

Nfamus86 · 11-28-2016, 08:44 AM

Yes, I did it. The calipers bolt directly to the spindle. And I used pathfinder 4x4 front rotors.
Took measurements and had the machine shop mimic the beebani adaptors. As far as the rears, I used 2008 frontier rear rotors, and made a plate welded to my axle ends. I have a thread in project builds, under nfamus d45 you can see it all. There's more to it but I can help you with any other questions

RONNIEBOY · 11-28-2016, 11:40 AM

Sweettttttttt

beebani · 12-01-2016, 05:19 AM

Awesome, thanks for taking my hard work, research, and design time and making it your own. Such innovation!

racin.man31 · 12-07-2016, 02:48 PM

Just out of curiosity, do replacement calipers from like napa or orieleys have the "NISSAN" cast into them like that or is that only going to be on oem nissan parts like from a dealership/junkyard

battleaxe · 01-06-2017, 05:17 AM

looks like he did what anyone would do to make an adapter..its not like he bought yours, got a machine shop to copy the measurements then re sold them.

sometimes people make stuff that any machinist can measure and make, then you have something.

Nfamus86 · 01-12-2017, 12:16 AM

I saw your adaptor beenani and understoood how they worked, and spent 2 months getting measurements and parts and a friend of mine that could run the machinery, P.S. I still ha e the plans saved and a couple people ask to buy. I could make money at $200 rather than the 3-350 you're asking on eBay, but I understand the hard work and bullshit you had to go through to make these, and If they want them, they can either A buy them from you, or B: do the same homework we did.. also. 2004 frontier front rotors are a better fit v.s pathfinder rotors. They are 283mm vs 276mm

Nfamus86 · 01-12-2017, 12:17 AM

Quote:

Originally Posted by racin.man31

Just out of curiosity, do replacement calipers from like napa or orieleys have the "NISSAN" cast into them like that or is that only going to be on oem nissan parts like from a dealership/junkyard

I don't believe so, I think it's only oem ones

02-05-2016, 12:46 AM	#1
RedT Join Date: Jan 2016 Location: Long Island, New York Posts: 19 Vehicle: '94 D21 Hardbody Thanks: 5 Thanked 1 Time in 1 Post	z32 Brake Swap Info Anyone have some info on swapping to z32 brakes completely? Thanks.

10-04-2016, 02:29 AM	#2
Motorhead I <3 WRENCHING Join Date: Jun 2009 Location: Long Island Age: 35 Posts: 614 Vehicle: TURBO HB & 2015 FORESTER XT & OLD 944 Thanks: 74 Thanked 63 Times in 45 Posts	yes happening soon hey lets meet up!!!!! __________________ THE CONTINUOUS AUTOX TURBO TRUCK BUILD HOW TO BOLT A D44 IN HOW TO BOOST IT ALREADY (BC YOU SHOULD) ITS JUST A WORK TRUCK BRO!

11-28-2016, 08:44 AM	#4
Nfamus86 Join Date: Dec 2010 Location: Omaha, NE Posts: 305 Vehicle: 1986 Nissan D21 Thanks: 5 Thanked 28 Times in 24 Posts	Yes, I did it. The calipers bolt directly to the spindle. And I used pathfinder 4x4 front rotors. Took measurements and had the machine shop mimic the beebani adaptors. As far as the rears, I used 2008 frontier rear rotors, and made a plate welded to my axle ends. I have a thread in project builds, under nfamus d45 you can see it all. There's more to it but I can help you with any other questions __________________ Dragged daily

12-07-2016, 02:48 PM	#7
racin.man31 Join Date: Aug 2011 Location: jasper al Posts: 189 Vehicle: 2000 frontier stock 2 inch blocks and tortion bar drop Thanks: 25 Thanked 8 Times in 8 Posts	Just out of curiosity, do replacement calipers from like napa or orieleys have the "NISSAN" cast into them like that or is that only going to be on oem nissan parts like from a dealership/junkyard __________________ 2000 fronty, 3 inch drop (tortion and blocks), header with no cat an dual tips, Eagle 15x9 alloys, LOUD AS HELL!!

01-12-2017, 12:16 AM	#9
Nfamus86 Join Date: Dec 2010 Location: Omaha, NE Posts: 305 Vehicle: 1986 Nissan D21 Thanks: 5 Thanked 28 Times in 24 Posts	I saw your adaptor beenani and understoood how they worked, and spent 2 months getting measurements and parts and a friend of mine that could run the machinery, P.S. I still ha e the plans saved and a couple people ask to buy. I could make money at $200 rather than the 3-350 you're asking on eBay, but I understand the hard work and bullshit you had to go through to make these, and If they want them, they can either A buy them from you, or B: do the same homework we did.. also. 2004 frontier front rotors are a better fit v.s pathfinder rotors. They are 283mm vs 276mm __________________ Dragged daily

11-26-2016, 02:32 AM	#3
DysfunctionalVeteranD21 Join Date: Aug 2016 Location: Long Island Posts: 18 Vehicle: 1992 D21 2017 Passat R-Line Daily 2008 Iron 883 Harley Thanks: 5 Thanked 4 Times in 4 Posts	Yasss also in longisland! MMMM

11-28-2016, 11:40 AM	#5
RONNIEBOY Join Date: Jul 2014 Location: Sunshine State! Posts: 1,381 Vehicle: 2003 Nissan pathfinder SE and 2000 ML320 . Thanks: 87 Thanked 160 Times in 150 Posts	Sweettttttttt

12-01-2016, 05:19 AM	#6
beebani Approved Vendor Join Date: Oct 2008 Location: Independence, Oregon Posts: 401 Vehicle: 1976 Datsun 620 Thanks: 11 Thanked 30 Times in 27 Posts	Awesome, thanks for taking my hard work, research, and design time and making it your own. Such innovation!

01-06-2017, 05:17 AM	#8
battleaxe Raspberry Jamm Join Date: Apr 2013 Location: Vancouver Island, BC Posts: 108 Vehicle: 1995 D21 Thanks: 1 Thanked 11 Times in 11 Posts	looks like he did what anyone would do to make an adapter..its not like he bought yours, got a machine shop to copy the measurements then re sold them. sometimes people make stuff that any machinist can measure and make, then you have something.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode