Pillar Gauge Pod Interest. - Infamous Nissan

Dowser · 01-18-2012, 03:23 AM

Hello Everyone.

I don't own a Hardbody, (don't take that literally

) but rather a 1995 Pathfinder. As many of you know a lot of parts are interchangeable. I came over here from NPORA,(Nissan Pathfinder Off Road Association) to see if there is any interest from any of you guys to get involved with a group buy to have a 2 or 3 gauge a pillar mold made from a company we've been looking into. They require about 20 purchases and I'm in the process of trying to get things organized to make it work out. The costs aren't too much either. We're guessing around $40-60 depending on how detailed it would be. At any rate, here's the thread so you can check it out for yourselves, and if there is anyone interested post up some interest on here and I'll update the numbers as we go along.

http://www.nissanpathfinders.net/for...lar-gauge-pod/

So this will be the Official Update Page for this project.

If any of you are interested in seeing the most current status, this will be the place to find it.

The price quote for the 3 gauge, no tweeter design is $54.99
The unit comes in standard black with the option for interior color matching for an additional $7.99
The Minimum order number is 20 and additional orders will not bring the price down.

We have 23 people who have Committed to purchase and a total of 24 orders.

Legend

Orange - Members who have received their purchase, everything perfect.
Green - Members waiting for their purchase to arrive.
Purple - Members who have received their purchase but with problems. (wrong color, damage, etc.)

Here are the 23 people who have Committed to purchase out of 28 original. A total of 24 orders.

Project Contributors

Precise - 2 (NPORA) - Products received.
Dowser - 1 (NPORA)
Adamzan - 1 (NPORA) - Product received.
sewebster - 1 (NPORA) - Product received.
puckstoper9 - 1 (NPORA) - Product received.
alabama_lowlife - 1 (Infamous Nissan)- Product received.
tmoore4512 - 1 (NPORA) - Product received.
RedPath88 - 1 (NPORA) - Product received.
theexbrit - 1 (NPORA) - Product received.
scoobysmak - 1 (Infamous Nissan) - Product received.
dvdswan - 1 (Infamous Nissan) - Product received.
KENDIG (Infamous Nissan) - Product received.
SnailPowered - 1 (NPORA)
Koveman - 1 (NPORA) - Product received.
teixeira - 1 (NPORA) - Product received.
lower byhalia - 1 (Infamous Nissan)
calicraig - 1 (Infamous Nissan) - Product received.
Inyourface1650 - 1 (Nissan4wheelers) - Product received.
Bucket-List - 1 (Infamous Nissan)
snowboard419 - 1 (NPORA)
4EyedTurd - 1 (Infamous Nissan) - Product received.
edicer2 - 1 (NPORA) - Product received.
Harbinger - 1 (NPORA) - Product received.

Interior Color Options

Red - Already sent - courtesy of alabama_lowlife from Infamous Nissan
Light Grey - Already sent - courtesy of David29 from Infamous Nissan
Dark Grey - Already sent - courtesy of alabama_lowlife from Infamous Nissan
Dark Brownish Grey- Already sent - courtesy of David29 from Infamous Nissan
Brownish Grey- Already sent - courtesy of David29 from Infamous Nissan
Tan- Already sent - courtesy of David29 from Infamous Nissan
Blue - Already sent - courtesy of alabama_lowlife from Infamous Nissan
Light Blue - Already sent - courtesy of David29 from Infamous Nissan
Black - Not needed, company makes in standard black

The sample A-pillar piece for them to use for a mock up and to give us a more accurate quote has been sent in. (alabama_lowlife)

Color Samples have been sent in. (alabama_lowlife and David29)

Photos of the interior with the Pillar in place have been sent. (Dowser)

Mock up trim piece with Pods attached has been sent to me for test fitting. It's been tweaked for proper positioning and angles and is packed up for return shipping. (Dowser)

Money has been collected, payment sent to the company. (Dowser)

Product is finished and being sent out to project contributors. (All of you! Nice work everyone.)

We're all finished! Before you know it, a 3 Gauge Pod A-Pillar will show up at your door. Thanks again to the crews at NPORA, Infamous Nissan, and Nissan4wheelers for helping to make this a reality. It couldn't have been done without everyone's support, trust, and influence.

jcjcsoccerkid · 01-18-2012, 11:50 AM

i'd like one for my frontier

alabama_lowlife · 01-18-2012, 01:39 PM

I'm in.

JunYa · 01-18-2012, 02:09 PM

Ill take one.

Ignacioser · 01-18-2012, 03:08 PM

Il take one, maybe two depending on price.

RedAggie03 · 01-18-2012, 03:29 PM

Sure I'm down as long as it keeps the factory tweeter grill. I could see having two or three pods, I'd maybe even buy one of each.

Brandon2012 · 01-20-2012, 06:03 PM

i like them. i been wanting some

minitruckin4life · 01-20-2012, 07:00 PM

id take one

Slaminsunfire · 01-20-2012, 07:32 PM

Me 2.....

Dowser · 01-21-2012, 04:30 AM

*Updated list and added some info on first post, please read if you have not done so already. January 21, 2012*

I spoke with them today and after the mold is made, its no big deal for them to put one unit out after that for anyone interested. Basically our order makes the mold making process worth their while. After the mold has been made, its golden.

Also while on the phone with them I asked about the difficulty in perhaps making a mold for the 2 gauge pod to utilize the tweeters for those still interested, then seeing if after the mold is made if they could just add another pod and make a second mold to keep everyone happy and get 2 molds made at the same time. He said there's no way because its a entirely different process and would have to be a separate mold. So before we start we'll have to take a vote and see how many members are still interested after that point. Secondly, I'm going to take an A-piller and sent it to him to get a more realistic price and to see if he can put 3 gauge pods in and still utilize a space for a tweeter, so that's still an option maybe. I'll be sending that off maybe sometime this week, unless someone near Durham, North Carolina wants to go to the company to let them see what they are working with. I'll get this out to other boards as I have time. Things are a little hectic as usual at them moment.

I'll let you guys know more when I do. Thanks all.

01-18-2012, 03:23 AM	#1
Dowser Join Date: Jan 2012 Location: Canada Posts: 59 Vehicle: 1995 Nissan Pathfinder SE 4WD Thanks: 0 Thanked 2 Times in 2 Posts	Pillar Gauge Pod Interest. Hello Everyone. I don't own a Hardbody, (don't take that literally) but rather a 1995 Pathfinder. As many of you know a lot of parts are interchangeable. I came over here from NPORA,(Nissan Pathfinder Off Road Association) to see if there is any interest from any of you guys to get involved with a group buy to have a 2 or 3 gauge a pillar mold made from a company we've been looking into. They require about 20 purchases and I'm in the process of trying to get things organized to make it work out. The costs aren't too much either. We're guessing around $40-60 depending on how detailed it would be. At any rate, here's the thread so you can check it out for yourselves, and if there is anyone interested post up some interest on here and I'll update the numbers as we go along. http://www.nissanpathfinders.net/for...lar-gauge-pod/ So this will be the Official Update Page for this project. If any of you are interested in seeing the most current status, this will be the place to find it. The price quote for the 3 gauge, no tweeter design is $54.99 The unit comes in standard black with the option for interior color matching for an additional $7.99 The Minimum order number is 20 and additional orders will not bring the price down. We have 23 people who have Committed to purchase and a total of 24 orders. Legend Orange - Members who have received their purchase, everything perfect. Green - Members waiting for their purchase to arrive. Purple - Members who have received their purchase but with problems. (wrong color, damage, etc.) Here are the 23 people who have Committed to purchase out of 28 original. A total of 24 orders. Project Contributors Precise - 2 (NPORA) - Products received. Dowser - 1 (NPORA) Adamzan - 1 (NPORA) - Product received. sewebster - 1 (NPORA) - Product received. puckstoper9 - 1 (NPORA) - Product received. alabama_lowlife - 1 (Infamous Nissan)- Product received. tmoore4512 - 1 (NPORA) - Product received. RedPath88 - 1 (NPORA) - Product received. theexbrit - 1 (NPORA) - Product received. scoobysmak - 1 (Infamous Nissan) - Product received. dvdswan - 1 (Infamous Nissan) - Product received. KENDIG (Infamous Nissan) - Product received. SnailPowered - 1 (NPORA) Koveman - 1 (NPORA) - Product received. teixeira - 1 (NPORA) - Product received. lower byhalia - 1 (Infamous Nissan) calicraig - 1 (Infamous Nissan) - Product received. Inyourface1650 - 1 (Nissan4wheelers) - Product received. Bucket-List - 1 (Infamous Nissan) snowboard419 - 1 (NPORA) 4EyedTurd - 1 (Infamous Nissan) - Product received. edicer2 - 1 (NPORA) - Product received. Harbinger - 1 (NPORA) - Product received. Interior Color Options Red - Already sent - courtesy of alabama_lowlife from Infamous Nissan Light Grey - Already sent - courtesy of David29 from Infamous Nissan Dark Grey - Already sent - courtesy of alabama_lowlife from Infamous Nissan Dark Brownish Grey- Already sent - courtesy of David29 from Infamous Nissan Brownish Grey- Already sent - courtesy of David29 from Infamous Nissan Tan- Already sent - courtesy of David29 from Infamous Nissan Blue - Already sent - courtesy of alabama_lowlife from Infamous Nissan Light Blue - Already sent - courtesy of David29 from Infamous Nissan Black - Not needed, company makes in standard black The sample A-pillar piece for them to use for a mock up and to give us a more accurate quote has been sent in. (alabama_lowlife) Color Samples have been sent in. (alabama_lowlife and David29) Photos of the interior with the Pillar in place have been sent. (Dowser) Mock up trim piece with Pods attached has been sent to me for test fitting. It's been tweaked for proper positioning and angles and is packed up for return shipping. (Dowser) Money has been collected, payment sent to the company. *(Dowser)* Product is finished and being sent out to project contributors. (All of you! Nice work everyone.) We're all finished! Before you know it, a 3 Gauge Pod A-Pillar will show up at your door. Thanks again to the crews at NPORA, Infamous Nissan, and Nissan4wheelers for helping to make this a reality. It couldn't have been done without everyone's support, trust, and influence. Last edited by Dowser; 02-05-2013 at 03:11 AM.

01-18-2012, 11:50 AM	#2
jcjcsoccerkid mod Join Date: Sep 2008 Location: carriere, ms Age: 31 Posts: 2,808 Vehicle: 98 frontier Thanks: 52 Thanked 97 Times in 88 Posts	i'd like one for my frontier __________________ aaron

01-18-2012, 03:29 PM	#6
RedAggie03 Super Moderator Join Date: Oct 2010 Location: Houston, TX Age: 37 Posts: 2,408 Vehicle: 1992 Nissan D21 Extended Cab Thanks: 33 Thanked 165 Times in 140 Posts	Sure I'm down as long as it keeps the factory tweeter grill. I could see having two or three pods, I'd maybe even buy one of each. __________________ 2014 Ford F-150 EcoScrew FX4 2006 Mini Cooper S 1992 Extended Cab Hardbody (sold)

01-20-2012, 06:03 PM	#7
Brandon2012 B-RAN Join Date: Nov 2011 Location: Mcneill Posts: 4 Vehicle: 1997 Nissan Hardbody Thanks: 0 Thanked 0 Times in 0 Posts	Nice i like them. i been wanting some

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-18-2012, 01:39 PM	#3
alabama_lowlife Owner and Administrator Join Date: Sep 2008 Location: jack, alabama Age: 38 Posts: 8,700 Vehicle: 2011 Nissan Frontier, 08 altima, 1970 Datsun 521, 1995 Nissan Hardbody Thanks: 500 Thanked 1,485 Times in 1,220 Posts	I'm in.

01-18-2012, 02:09 PM	#4
JunYa Join Date: Apr 2010 Location: New Brockton, AL Age: 30 Posts: 654 Vehicle: 1987 Nissan Pickup Thanks: 2 Thanked 11 Times in 9 Posts	Ill take one.

01-18-2012, 03:08 PM	#5
Ignacioser Iggy / Nacho Join Date: Nov 2009 Location: So-Cal Age: 30 Posts: 299 Vehicle: '95 Nissan Hardbody XE Thanks: 4 Thanked 1 Time in 1 Post	Il take one, maybe two depending on price.

01-20-2012, 07:00 PM	#8
minitruckin4life I look like ShamWow!! Join Date: Sep 2008 Location: syracuse ny Posts: 224 Vehicle: 1994 hardbody, 2004 fronty Thanks: 0 Thanked 1 Time in 1 Post	id take one

01-20-2012, 07:32 PM	#9
Slaminsunfire Donkey Master Join Date: Dec 2011 Location: Jacksonville Fl Posts: 1,811 Vehicle: 2000 Frontier Thanks: 42 Thanked 202 Times in 183 Posts	Me 2.....

01-21-2012, 04:30 AM	#10
Dowser Join Date: Jan 2012 Location: Canada Posts: 59 Vehicle: 1995 Nissan Pathfinder SE 4WD Thanks: 0 Thanked 2 Times in 2 Posts	*Updated list and added some info on first post, please read if you have not done so already. January 21, 2012* I spoke with them today and after the mold is made, its no big deal for them to put one unit out after that for anyone interested. Basically our order makes the mold making process worth their while. After the mold has been made, its golden. Also while on the phone with them I asked about the difficulty in perhaps making a mold for the 2 gauge pod to utilize the tweeters for those still interested, then seeing if after the mold is made if they could just add another pod and make a second mold to keep everyone happy and get 2 molds made at the same time. He said there's no way because its a entirely different process and would have to be a separate mold. So before we start we'll have to take a vote and see how many members are still interested after that point. Secondly, I'm going to take an A-piller and sent it to him to get a more realistic price and to see if he can put 3 gauge pods in and still utilize a space for a tweeter, so that's still an option maybe. I'll be sending that off maybe sometime this week, unless someone near Durham, North Carolina wants to go to the company to let them see what they are working with. I'll get this out to other boards as I have time. Things are a little hectic as usual at them moment. I'll let you guys know more when I do. Thanks all.