Go Back   Infamous Nissan - Hardbody / Frontier Forums > Tech Area > Interior & Audio/Video

Reply
 
Thread Tools Display Modes
Old 10-20-2017, 04:23 AM   #1
Hands On
 
Hands On's Avatar
 
Join Date: Aug 2017
Location: United States
Posts: 42
Vehicle: A Hardbody
Thanks: 11
Thanked 6 Times in 6 Posts
Default Swap gauge faces/needle removal

I installed a cluster from a Pathfinder with a clock into my '97 and the illumination is much flatter, ie. less hot spots from the light bulbs.

The speedo works, but I got a VSS code. Reset, came back after about 50mi, reset, has stayed off after over 100mi. The odometer/tripmeter also don't work, so I was looking for a way to swap the gauge face onto my original speedometer and the needle which is a slightly different color. I unscrewed everything from the back and front, and looks like it wanted to come off but the I couldn't remove the needle by tugging and don't want to break anything. Did not find anything about needle removal when searching.

Any tips or suggestions for the easiest way to get the preferred face and working odometer. Would prefer to keep the correct mileage too.
Hands On is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:43 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.