Go Back   Infamous Nissan - Hardbody / Frontier Forums > Model Specific > 04+ Titan Forum

Reply
 
Thread Tools Display Modes
Old 04-15-2011, 03:43 AM   #1
Memo7070
 
Join Date: Nov 2010
Location: Green Valley, Az
Posts: 61
Vehicle: 1989 Nissan Hardbody
Thanks: 0
Thanked 0 Times in 0 Posts
Default 06 Titan is blowing at high speed....

Well the other day I was driving on the highway and all of a sudden, the a/c went full blast. I tried to move the switch to a lower speed and nothing.
I called the stealership and they would charge me 98 bucks just to tell me what the problem is. Is there anything that I can check before I take it to get checked. I know that there are some resistors on it somewhere, please help before I get robbed...lol!! Thanks in Advance!!

Memo
Memo7070 is offline   Reply With Quote
Old 04-15-2011, 12:44 PM   #2
Mhope
Nissan Scope Master Tech
 
Mhope's Avatar
 
Join Date: Feb 2011
Location: Georgia
Posts: 363
Vehicle: 1995 nissan hardbody
Thanks: 0
Thanked 0 Times in 0 Posts
Default

There is a blower resister close to the blower motor under the dash on the passengerside. No way to check it but replace it. normally that is what happens when they blow only on high speed.
__________________
Mhope is offline   Reply With Quote
Old 04-16-2011, 02:44 AM   #3
mini702
INfamous Blacksheep
 
mini702's Avatar
 
Join Date: Sep 2008
Location: Vegas
Age: 44
Posts: 1,440
Vehicle: 88 Pathy 4x, 90 Kingcab v6, 93 J30
Thanks: 2
Thanked 21 Times in 19 Posts
Default

^^ same thing. you can generally check resistors with an ohm meter, but it still has to be replaced to work.
look at an fsm from the early 90s, same technology, better diy manual. i think the sentra/nx had the info i looked up.
__________________
I read repair manuals.

1990 Hardbody Kingcab SE-V6, 5-lug swap 350z wheels, 3" blocks hanger redrill 2" spindles, factory paint fading & peeling, y32 swap in progress, irs in future.
mini702 is offline   Reply With Quote
Old 07-07-2011, 04:42 PM   #4
NISSANFREAK
PORKCHOP
 
NISSANFREAK's Avatar
 
Join Date: Sep 2010
Location: FOLEY, ALABAMA
Posts: 443
Vehicle: 1995 NISSAN HARDBODY D21U
Thanks: 28
Thanked 23 Times in 19 Posts
Default

That resister is a very common problem wth titans. Part# is 27151-ZW00A if you call your local nissan dealership
NISSANFREAK is offline   Reply With Quote
Old 07-08-2011, 10:58 PM   #5
nislo
Pay Up Sucka
 
nislo's Avatar
 
Join Date: Sep 2008
Location: Harrisburg, PA
Age: 32
Posts: 984
Vehicle: 2005 NISSAN FRONTIER KC 4x2
Thanks: 1
Thanked 4 Times in 4 Posts
Default

Its called a VBC and is most likely the cause. its squarish with a black plastic top and a big aluminum heat sink that sticks into blower box by the blower motor
__________________
nislo is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:41 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.