View Single Post
Old 11-09-2017, 09:15 PM   #2
86.5KC
 
86.5KC's Avatar
 
Join Date: Jun 2016
Location: Lehigh Valley PA
Posts: 138
Vehicle: Nissan D21 1986.5, King Cab, Z24i, 5speed, 2wd
Thanks: 12
Thanked 46 Times in 44 Posts
Default

Hi BigCityFire,
Here are what I used to replace my fender bolts with..... M6x1.0 https://www.mcmaster.com/#95735a216/=1a6nhn3
and for those ones that snapped off in the threaded insert, I used these to replace all the threaded inserts..... https://www.mcmaster.com/#96887a319/=1a6ni0n
The guy that I got my truck from used some 5/16 sheet metal screws to hold the fender on because he broke 100% of the bolts that hold on the driver side fender.....
and apparently those screws were okay with him(me not so much)...

Last edited by 86.5KC; 11-09-2017 at 09:59 PM.
86.5KC is offline   Reply With Quote