View Single Post
Old 06-01-2018, 06:28 PM   #25
Cusser's Avatar
Join Date: Aug 2016
Location: Hot Arizona
Posts: 380
Vehicle: 2004 Frontier
Thanks: 0
Thanked 46 Times in 38 Posts

So after cleaning up the parking brake switch and confirming proper operation today, turns out that I had some black wire already, so soldered that to the short switch wire, and used shrink tubing. Then I routed that wire out of the way, crimped on male & female terminals to that new wire and the original wire from the truck, electrical-taped that, and now brake warning light works as it should. Below: engine running, parking brake engaged, lights as it should. Then rear drum b rakes adjusted manually to compensate for the wear, success !!
2004 Frontier King Cab (2WD, 5-speed, 4-cylinder, 98.5K), 1998 Frontier regular cab (2WD, 5-speed, 4-cylinder 225K), 1988 Mazda B2200 (2WD, 5-speed, 4-cylinder, 214K), 1971 VW Convertible (140K), 2005 Yukon (180K), 1970 VW (260+K)
Cusser is offline   Reply With Quote