View Single Post
Old 05-31-2018, 11:24 PM   #24
Cusser
 
Cusser's Avatar
 
Join Date: Aug 2016
Location: Hot Arizona
Posts: 310
Vehicle: 2004 Frontier
Thanks: 0
Thanked 30 Times in 26 Posts
Default

I removed my parking brake switch today, it was inoperative, would not operate the "BRAKE" light on the dash when engaged with the engine running. I believe this part number is 3601101G00, but I was able to clean up my switch using my drill press with the wire wheel, checked with ohmmeter many times. In this process I either broke or found the single black wire to it to be broken. Tomorrow I plan to solder a piece of wire to fix this, was wondering if the parking brake assembly is able to be readily unbolted from the firewall, and if so: how, please !!! I think that might make things easier. My truck does not have a "connector" on this wire.
https://www.ebay.com/itm/Frontier-Ha...NadQo5&vxp=mtr
Picture from Ebay of this part:


The official 1998 Frontier service manual is ZERO help on this. Thanks.
__________________
2004 Frontier King Cab (2WD, 5-speed, 4-cylinder, 98.5K), 1998 Frontier regular cab (2WD, 5-speed, 4-cylinder 225K), 1988 Mazda B2200 (2WD, 5-speed, 4-cylinder, 214K), 1971 VW Convertible (140K), 2005 Yukon (180K), 1970 VW (260+K)
Cusser is offline   Reply With Quote