View Single Post
Old 07-29-2021, 05:17 PM   #5
Stinky
 
Join Date: Nov 2019
Location: Whitewater, CO
Posts: 98
Vehicle: 86 2wd 720, 86 4x4D21
Thanks: 0
Thanked 9 Times in 9 Posts
Default

I finally got the bushing in. I used all-thread, and a variety of washers and the ATV retaining ring for my hand-tire installer.


That ring. It is 3/8" thick. about 6" around and has a 2" hole in the center (a big washer/donut). I was at the scrap place after I took a load in. I saw it on the ground....cool, I gotts to have dat. I tossed it in the truck and paid scrap prices for it. Later. I found that it works perfect for holding an ATV wheel down while changing the tire.
Stinky is offline   Reply With Quote