Thread: $200 Hardbody
View Single Post
Old 06-01-2020, 04:16 AM   #86
PoodlePuncher
 
PoodlePuncher's Avatar
 
Join Date: Jan 2020
Location: Minnesota
Posts: 107
Vehicle: 95 XE
Thanks: 9
Thanked 10 Times in 10 Posts
Default

started with the upper balljoint, drivers side (problematic side).


The nut came off suprisingly easy, but no matter how much beating i did on the knuckle, the joint wouldn't break loose.


Ended up seperating the joint from the upper control arm



once i cut away the boot, i was able to wedge a large wrench in between as a lever.
one tap later, and it popped free.


Unfortunately, the balljoints i recieved do not fit in the control arm





They look nothing like the product picture, but the part number is supposedly correct.
FML
__________________
'95 4x4 King Cab XE - '16 Veloster Turbo - '00 Durango
YouTube
PoodlePuncher is offline   Reply With Quote