View Single Post
Old 11-26-2019, 04:36 AM   #434
static drop
 
static drop's Avatar
 
Join Date: Dec 2013
Location: Jackson, KY
Posts: 741
Vehicle: 94 Nissan Hardbody
Thanks: 179
Thanked 77 Times in 64 Posts
Default

Sorry...no pics for this post. Lot of progress but wasnít gonna bore everyone with pics of pretty much just welds and fish plates... Have the frame cut off from the jig and turned over finished welding the underside of the frame. Do have all the fishplates welded on and, the wishbone mount in. Link mounts have been cut off the rear end and, the lowers have moved from where they were and welded back on.
Working also on a new front crossmember that will gain some more room to drop the motor just a little lower because Iím a little concerned about hood clearance.
Does look awesome laying flat on the shop floor though even though the rear axle isnít under it at the moment. Will do a photo update in a few days when the rear axle is back under it.
__________________
97 xcab daily Sold
94 regular cab project
static drop is offline   Reply With Quote