Go Back   Infamous Nissan - Hardbody / Frontier Forums > Search Forums

Showing results 1 to 25 of 152
Search took 0.03 seconds.
Search: Posts Made By: 86.5KC
Forum: Hardbody Forum (D21) 03-19-2019, 08:52 PM
Replies: 4
Views: 71
Posted By 86.5KC
Dan, The 4x4 fenders should help, but I do...

Dan,
The 4x4 fenders should help, but I do think you may have to stretch the fender a bit to get it to clear the poke you have going on there. IIRC the 4wd fenders add ~1.25" to the bulge area...
Forum: Interior & Audio/Video 03-07-2019, 05:27 PM
Replies: 7
Views: 163
Posted By 86.5KC
Your kit should have the contact plate that...

Your kit should have the contact plate that rides on the oem contact for the horn. The original wheel should have a set of contacts that look like spring-loaded fingers that ride on the multi-ring...
Forum: Wheels and Tires 02-25-2019, 01:56 PM
Replies: 4
Views: 97
Posted By 86.5KC
Armand, The correct fix for your problem...

Armand,
The correct fix for your problem would be to +1 the wheel size, like go to a pathfinder 15" wheel. The spindle manufacturers all state very clearly that the stock 14" should not be used...
Forum: Interior & Audio/Video 02-04-2019, 02:10 PM
Replies: 1
Views: 276
Posted By 86.5KC
Hi GDLG, If you are doing a like-for-like...

Hi GDLG,
If you are doing a like-for-like swap, round dash to round dash the parts should interchange. If you are doing a square dash to round dash swap this post should have most of the...
Forum: Project Build Log 01-31-2019, 01:02 PM
Replies: 190
Views: 27,251
Posted By 86.5KC
I Like those fenders. Looking good! Love the...

I Like those fenders. Looking good! Love the direction this truck is going!!!! Awesome work, thanks for sharing!
Forum: Hardbody Forum (D21) 01-30-2019, 01:51 PM
Replies: 10
Views: 665
Posted By 86.5KC
JPH, I lucked up here on IN and found someone...

JPH,
I lucked up here on IN and found someone who was looking for the PS equipment to convert from manual to PS. I shipped him my PS parts and he sent me his manual parts.

I have never searched...
Forum: Hardbody Forum (D21) 01-29-2019, 12:58 PM
Replies: 10
Views: 665
Posted By 86.5KC
Hi JPH, Yes, you will need more than the...

Hi JPH,
Yes, you will need more than the gearbox. I have done this exact conversion on my 86.5. You will need the steering box and the lower section of the steering column. The lower section of...
Forum: Hardbody Forum (D21) 01-22-2019, 02:43 PM
Replies: 8
Views: 224
Posted By 86.5KC
Hi Wersh, Yes they still bolt up and work...

Hi Wersh,
Yes they still bolt up and work perfectly fine. All the holes are there and frankly they add a bit of an aggressive look to the 2wd trucks that I appreciate.
I have the Pathy front end...
Forum: Hardbody Forum (D21) 01-21-2019, 09:55 PM
Replies: 4
Views: 303
Posted By 86.5KC
Hi Lilfoot, I also have an 86.5 truck, and if...

Hi Lilfoot,
I also have an 86.5 truck, and if I recall correctly, there are differences in the two engines and the ECMs do not swap from the Z24 to the KA. This will lead you to pulling the whole...
Forum: Wiring and Electrical 01-18-2019, 01:17 PM
Replies: 2
Views: 203
Posted By 86.5KC
Hi Bolo, I would believe that they are. The...

Hi Bolo,
I would believe that they are. The Quest (125A) alternator upgrade that I did on my 86 used the same connectors, I did have to make the through bolt hole larger and swap the pulley, but...
Forum: Hardbody Forum (D21) 01-10-2019, 08:48 PM
Replies: 3
Views: 116
Posted By 86.5KC
Hi 1low, Yes(sort of)..... The 4wd as far as...

Hi 1low,
Yes(sort of)..... The 4wd as far as I know all had the 2piston calipers so did the 2wd v6 trucks. The 2wd 4cylinder trucks had a 1 piston caliper. I have done the big brake upgrade to my...
Forum: Suspension 01-04-2019, 12:15 PM
Replies: 12
Views: 568
Posted By 86.5KC
As far as the alignment shop goes for swapping...

As far as the alignment shop goes for swapping the bolts, I would think that I would prefer to swap the bolts before I took it to the shop. This way you know that they wont pitch a fit(or charge you...
Forum: Suspension 01-03-2019, 09:07 PM
Replies: 12
Views: 568
Posted By 86.5KC
Yes, that will get you the low you are looking...

Yes, that will get you the low you are looking for, but do know you WILL have to trim or remove your bumpstops to keep from riding on only the rubber. You probably will have to also change out your...
Forum: Suspension 01-03-2019, 12:34 PM
Replies: 12
Views: 568
Posted By 86.5KC
Hi Mazdaspeed, I have my truck lowered...

Hi Mazdaspeed,
I have my truck lowered ~4.5inches in the rear and ~5 inches in the front. I went a different direction than you but my driveline measurements should get you close. In th e rear, I...
Forum: Hardbody Forum (D21) 12-10-2018, 12:52 PM
Replies: 16
Views: 202
Posted By 86.5KC
Hi Lloyd, I would think that the place to...

Hi Lloyd,
I would think that the place to begin is to verify the speed sensor pulse coming from the transmission is working. The sensor is a 2 wire unit, the input side is ground, the output side...
Forum: Project Build Log 11-08-2018, 12:25 PM
Replies: 190
Views: 27,251
Posted By 86.5KC
Dammit Jess, That bumper looks way better than...

Dammit Jess,
That bumper looks way better than I remembered. Now I have to go out and see if I can find one. It looks like it belongs on there. Very nice job. Looking really good. I love the...
Forum: Exterior & Paint and Body 10-17-2018, 01:12 PM
Replies: 2
Views: 366
Posted By 86.5KC
Hi Cusser That looks good. It will definitely...

Hi Cusser
That looks good. It will definitely help keep that road debris from entering to damage the condenser.
Nicely done.
Forum: Exterior & Paint and Body 09-24-2018, 09:26 PM
Replies: 12
Views: 572
Posted By 86.5KC
I paid ~260 for the windshield with installation...

I paid ~260 for the windshield with installation and the upper trim from Safelite ~2years ago.....
You decide if getting it transported from the JY to wherever is getting installed, plus the cost...
Forum: Hardbody Forum (D21) 08-21-2018, 10:12 PM
Replies: 35
Views: 981
Posted By 86.5KC
My 86.5 2wd has c clips to retain the T-bars....

My 86.5 2wd has c clips to retain the T-bars. Just thought I would add to the conversation.
Good luck with the removal.
Forum: Suspension 08-13-2018, 01:01 PM
Replies: 13
Views: 507
Posted By 86.5KC
Hi Stickeye, The reason that I say it appears...

Hi Stickeye,
The reason that I say it appears that he has the HD chassis is because if you look at the pic he posted zoomed in, you can see that he has the fully boxed rear frame rails, which I am...
Forum: Suspension 08-09-2018, 01:09 PM
Replies: 13
Views: 507
Posted By 86.5KC
Hi Jim, I think that you have the HD chassis,...

Hi Jim,
I think that you have the HD chassis, which is would explain why your axle is located on the bottom of the springs rather than under like most 2wd trucks..Alternatively, you could look for...
Forum: Project Build Log 07-26-2018, 07:02 PM
Replies: 13
Views: 1,197
Posted By 86.5KC
Hi Niz That is a nice looking truck, and with...

Hi Niz
That is a nice looking truck, and with all of the updates you plan to do, it will make a nice project.
Good luck on your build. Keep the updates(&Pics) coming.
Thanks
Forum: Suspension 07-17-2018, 08:58 PM
Replies: 8
Views: 423
Posted By 86.5KC
It depends on how low you are looking to go, I...

It depends on how low you are looking to go,
I have lowering spindles, shorter 4wd front shocks and my torsions adjusted down a bit with no bump stops(they were not there when I bought the truck)....
Forum: Exterior & Paint and Body 07-16-2018, 03:13 PM
Replies: 4
Views: 390
Posted By 86.5KC
I like it, Looks very clean. Well done!

I like it, Looks very clean. Well done!
Forum: Hardbody Forum (D21) 07-02-2018, 10:22 PM
Replies: 10
Views: 386
Posted By 86.5KC
Hi Jim, I would think that the front fenders...

Hi Jim,
I would think that the front fenders (Wings) could swap from one truck to the next, so you should be just fine if you want to swap on the other style fender with the body line that carries...
Showing results 1 to 25 of 152

 
Forum Jump

All times are GMT. The time now is 02:40 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.