Go Back   Infamous Nissan - Hardbody / Frontier Forums > Search Forums

Showing results 1 to 25 of 500
Search took 0.07 seconds.
Search: Posts Made By: Reserector
Forum: Hardbody Forum (D21) 03-21-2019, 05:45 PM
Replies: 5
Views: 89
Posted By Reserector
If it is 4x4, you can lock the hubs to see if it...

If it is 4x4, you can lock the hubs to see if it goes away. But odds are that it's the bushings in your locking hubs that need a little grease.
Forum: Hardbody Forum (D21) 03-01-2019, 05:38 PM
Replies: 19,234
Views: 1,412,708
Posted By Reserector
If they are both H233B they should be the same. ...

If they are both H233B they should be the same. 31 spline, and the same width.
Forum: Hardbody Forum (D21) 02-14-2019, 05:51 PM
Replies: 5
Views: 201
Posted By Reserector
If it's an occasional clunk, I would be...

If it's an occasional clunk, I would be suspicious that the tires may be different sizes front and rear. That would put the t-case chain in an ever-increasing bind until either A.) the tires skid...
Forum: Engine and Drivetrain 02-14-2019, 05:43 PM
Replies: 24
Views: 23,574
Posted By Reserector
I used the Chevy firewall, which moved the engine...

I used the Chevy firewall, which moved the engine back. That allowed me to use the Chevy radiator and condenser.

Mine is a King Cab, which is the key to doing this because I had to move the...
Forum: Hardbody Forum (D21) 01-30-2019, 05:31 PM
Replies: 15
Views: 797
Posted By Reserector
A new pump with a working regulator should fix...

A new pump with a working regulator should fix it. It just takes the right piece of dirt or oil pump shard to jam a valve like that.
Forum: Hardbody Forum (D21) 01-25-2019, 05:24 PM
Replies: 19,234
Views: 1,412,708
Posted By Reserector
On my Z21i I had a chain guide wear out, which...

On my Z21i I had a chain guide wear out, which let the tension plunger come out too far, causing loss of oil pressure.
I drove it home from work, stopping only to buy a chain kit.
I started on it...
Forum: General Discussion 01-24-2019, 02:48 PM
Replies: 12
Views: 556
Posted By Reserector
Sorry to hear that you are going through a tough...

Sorry to hear that you are going through a tough time. I hope you find peace soon. Stay positive. Look at is as an opportunity.
I hate to see you part with the truck. Maybe someone can store it...
Forum: Engine and Drivetrain 01-07-2019, 02:52 PM
Replies: 7
Views: 313
Posted By Reserector
If it's 4x4, is the t-case in neutral? Did the...

If it's 4x4, is the t-case in neutral?
Did the driveshaft come loose?

If not, I suspect you need to drop the transmission and investigate the clutch, and then the input shaft, and go from there.
Forum: Hardbody Forum (D21) 01-07-2019, 02:42 PM
Replies: 19,234
Views: 1,412,708
Posted By Reserector
My hat is off to anyone in the northern coldness....

My hat is off to anyone in the northern coldness. May God bless you. I don't think I could survive that anymore.

I was outside in the sunshine in just my shirt yesterday videoing segments for my...
Forum: Hardbody Forum (D21) 01-04-2019, 04:18 PM
Replies: 10
Views: 214
Posted By Reserector
I wonder if the transmission is not quite in the...

I wonder if the transmission is not quite in the correct place relative to the opening in the floor, causing the shifter to hit the edge of the opening before it fully shifts. If your truck has a...
Forum: 4x4 and Offroading 01-02-2019, 08:49 PM
Replies: 7
Views: 384
Posted By Reserector
I always tapped mine back snug with a hammer and...

I always tapped mine back snug with a hammer and screwdriver or punch. I'd get the slack out, spin it to work the grease in, and go a little further to preload the bearings by feel.
It's not the...
Forum: Hardbody Forum (D21) 12-28-2018, 05:43 PM
Replies: 19,234
Views: 1,412,708
Posted By Reserector
I built and tested my tag axle. Was a booger to...

I built and tested my tag axle. Was a booger to engineer, but worked out beyond my expectations in the end. Weight distribution is spot-on. No more body roll in turns.

The whole thing pins in...
Forum: Engine and Drivetrain 12-20-2018, 05:26 PM
Replies: 4
Views: 152
Posted By Reserector
I stuck a whole 5.3 Silverado in my 4x4 King Cab....

I stuck a whole 5.3 Silverado in my 4x4 King Cab. The links are in my sig. Start with the YouTube vid (The FM "Z71 Conversion" Explained Vid) to get a quick overview.

the build thread link is...
Forum: Wiring and Electrical 12-18-2018, 03:03 PM
Replies: 1
Views: 179
Posted By Reserector
"property of bell telephone for future...

"property of bell telephone
for future use"
Forum: Engine and Drivetrain 12-17-2018, 02:52 PM
Replies: 11
Views: 304
Posted By Reserector
Classic for the Z24i. When mine went, it did...

Classic for the Z24i. When mine went, it did more than making noise. I guess yours gave a little warning.
Forum: Hardbody Forum (D21) 12-11-2018, 05:29 PM
Replies: 19,234
Views: 1,412,708
Posted By Reserector
Thermostat put in backward, perhaps?

Thermostat put in backward, perhaps?
Forum: Hardbody Forum (D21) 12-07-2018, 05:41 PM
Replies: 8
Views: 200
Posted By Reserector
Go by your local driveline shop, tell them what...

Go by your local driveline shop, tell them what you want to do, and get a quote to have yours retubed. If it's in your budget, do it.
Forum: Hardbody Forum (D21) 12-07-2018, 05:36 PM
Replies: 19,234
Views: 1,412,708
Posted By Reserector
No. Not even if you take the t-case off first...

No. Not even if you take the t-case off first because the t-case won't clear.
Forum: Hardbody Forum (D21) 11-30-2018, 02:39 PM
Replies: 19,234
Views: 1,412,708
Posted By Reserector
I found pre-cut strips at Lowe's that are sold as...

I found pre-cut strips at Lowe's that are sold as stair tread grip. Durable stuff.
Forum: Hardbody Forum (D21) 11-26-2018, 05:20 PM
Replies: 9
Views: 293
Posted By Reserector
He might lose t-case fluid without the slip joint...

He might lose t-case fluid without the slip joint in place.
Forum: Hardbody Forum (D21) 11-21-2018, 11:05 PM
Replies: 22
Views: 598
Posted By Reserector
Could the EGR be stuck open?

Could the EGR be stuck open?
Forum: Hardbody Forum (D21) 11-17-2018, 07:14 PM
Replies: 22
Views: 598
Posted By Reserector
On the older Z24i versions, you need to take out...

On the older Z24i versions, you need to take out all of the bolts except for the two underneath, near the middle. Those two were studs. Just loosen the nuts, break the manifold loose, and lift it...
Forum: Hardbody Forum (D21) 11-15-2018, 05:32 PM
Replies: 11
Views: 456
Posted By Reserector
If you plan to rebuild it, stop driving it like...

If you plan to rebuild it, stop driving it like that asap. There is a good chance you still have usable gearsets, but that will go away once a bearing grenades.

Check with local shops. Get...
Forum: Hardbody Forum (D21) 11-15-2018, 05:22 PM
Replies: 19,234
Views: 1,412,708
Posted By Reserector
That's like saying "Don't break wind, or you...

That's like saying "Don't break wind, or you might get underwear lint in your butt hole, which is the leading cause of male cervical cancer."

But seriously, the seal is essentially like a check...
Forum: Hardbody Forum (D21) 11-12-2018, 09:06 PM
Replies: 6
Views: 285
Posted By Reserector
Everything from where the front cable meets the...

Everything from where the front cable meets the rear cable (under the passenger side) is the same for either set-up. All you need is everything from that point forward.
Showing results 1 to 25 of 500

 
Forum Jump

All times are GMT. The time now is 08:47 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.