Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   The Datsun Era (http://www.infamousnissan.com/forum/forumdisplay.php?f=22)
-   -   1984 720 4WD Dually, 6x5.5 to 6x6.5 Hubs/Wheel Adapters (http://www.infamousnissan.com/forum/showthread.php?t=45094)

BlueXL 01-31-2021 06:20 AM

1984 720 4WD Dually, 6x5.5 to 6x6.5 Hubs/Wheel Adapters
 
I'm fairly new to the forum, but I looked through previous posts and didn't find much regarding my specific inquiry.

I was wondering if a hub from a rear full floating axle was interchangeable with a front*hub on a 4x4.

We have a 1984 dually full float rear end with a wheel pattern that is 6x6.5. It is on an 85 720 4x4 chassis and we want to run matching dually wheels in the front to avoid two different spares. The dually wheels are 14" and we are wondering if anyone knows if the wheel hub from the dually is interchangeable should we be able to locate one. There are a few Nissan Motor Homes in local junk yards that we might still be able to poach, just want to ask to see if anyone is familiar.

The other option is to use a wheel adapter. We found one but not sure if the 1.5" thickness will clear the dually wheel with a 27x8.50R14 Tire. This is the adapter: https://billetwheeladapters.com/6-lu...thick-833.html


Any help would be appreciated. Thanks in advance.


All times are GMT. The time now is 10:43 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.