Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   Performance and Drifting (http://www.infamousnissan.com/forum/forumdisplay.php?f=48)
-   -   Chevy Automatic Transmissions (http://www.infamousnissan.com/forum/showthread.php?t=38557)

Walker 11-21-2016 12:56 AM

Chevy Automatic Transmissions
 
So I'm looking for a picture I saw on here a while back that shows how Chevy automatic transmissions mount up with the stock Nissan tranny crossmemeber. I looked in the build thread and here too and I cannot find it. Can somebody post that up here or point me in the right direction that I can find it?

Thanks!!!

Foul_Mouth 11-21-2016 01:07 AM

ASR31 has info on that in his drift truck build thread.

estetic 11-21-2016 02:20 PM

Turbo 350 lines up with the stock x-member. I ended up opening and elongating the holes a bit.

Kawabuggy 03-06-2017 11:33 PM

4L60E/700R4 also line up perfectly with the factory crossmember IN MY TRUCK. I put a 4L60E into my 1994 Nissan King Cab and used a trans mount out of a 2004 Suburban and it dropped right onto the factory cross-member, in the factory location.

Keep in mind you can use ANY of the GM transmissions pretty easily. Many of them are direct fit, and others such as the 4L80E will go in with NO TUNNEL MODS, but you will have to modify the crossmember for it to work.


All times are GMT. The time now is 07:14 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.