Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   Wiring and Electrical (http://www.infamousnissan.com/forum/forumdisplay.php?f=47)
-   -   wirring a 92 wirring harness to a 96 distibuter (http://www.infamousnissan.com/forum/showthread.php?t=45839)

liltwistedjoker 09-14-2021 03:36 AM

wirring a 92 wirring harness to a 96 distibuter
 
i recently bought a 96 engine for my truck not aware that the distributer mount was differnt so now i have to wire my 1992 wirring harness up to the 1996 distributer can anyone help with this?

89'HBV6 09-14-2021 04:26 AM

Welcome...

Helps to know a bit more... which engine? 4 or 6? Auto or Manual trans...

Reserector 09-14-2021 09:33 PM

Quote:

Originally Posted by 89'HBV6 (Post 553124)
Welcome...

Helps to know a bit more... which engine? 4 or 6? Auto or Manual trans...

'96 and '97 only came with 4 cyl. Go sit in the corner.

89'HBV6 09-14-2021 11:13 PM

Quote:

Originally Posted by Reserector (Post 553151)
'96 and '97 only came with 4 cyl. Go sit in the corner.









:hide:
:drink:

Reserector 09-15-2021 11:49 AM

You may have to change the ECU as well.

One thing I know about the '96 is that it had a position sensor in the top center of the bell housing. You '92 likely doesn't have that. At least not yet. May be something you can add. Probably need the bell housing, the sensor, the flywheel the engine harness and the ECU from the '96 truck to make it all work.

liltwistedjoker 09-15-2021 07:46 PM

The engines are the 2.4 4 cylinder not using the 96 trans using the 92 trans.

david29 09-20-2021 12:59 PM

You will need to swap the timing chain cover from your 92 onto the 96 engine. Problem solved.


All times are GMT. The time now is 03:17 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.