Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   Vendors (http://www.infamousnissan.com/forum/forumdisplay.php?f=28)
-   -   high angle steering knuckles, d21 d22 (http://www.infamousnissan.com/forum/showthread.php?t=16916)

pejsa HB 07-26-2011 05:01 PM

high angle steering knuckles, d21 d22
 
UPDATE: On line store created.

order yours at http://Missileworksllc.com

Cores not required

about the parts

these are tig welded pieces and require hardly any fabrication for installation. i dont have angle numbers yet, but i will tell you they far surpass the 37* steering i once had, they make your steering alot more responsive but as a trade off it is harder to turn, and will be tough on your tires.

1. you will need to trim your old steering stop out.
2. you will need an alignment.
3. you might have to bang out your wheel wells (i dont have inner wheel wells so i dont know).
4. Kits will come with extended brake lines

pics
these are the parts before modification
http://i67.photobucket.com/albums/h3...a/IMG_4396.jpg

this is how i trimmed my steering stop
http://i67.photobucket.com/albums/h3...IMG_4395-1.jpg

how they look post weld
http://i67.photobucket.com/albums/h3...a/IMG_4404.jpg

post paint
http://i67.photobucket.com/albums/h3...a/IMG_4405.jpg

installed
http://i67.photobucket.com/albums/h3...a/IMG_4406.jpg

steering angle pics
http://i67.photobucket.com/albums/h3...a/IMG_4398.jpg

http://i67.photobucket.com/albums/h3...a/IMG_4399.jpg

http://i67.photobucket.com/albums/h3...a/IMG_4401.jpg

http://i67.photobucket.com/albums/h3...a/IMG_4402.jpg

http://i67.photobucket.com/albums/h3...a/IMG_4407.jpg

http://i67.photobucket.com/albums/h3...a/IMG_4408.jpg


track tested!!!
http://i67.photobucket.com/albums/h3...sa/zoepic2.jpg

http://i67.photobucket.com/albums/h3...sa/zoepic4.jpg

JunYa 07-26-2011 05:25 PM

Damn that's CRAZY! Good job bro

pejsa HB 07-26-2011 06:20 PM

thanks man

JOHN92 07-26-2011 06:40 PM

That's cool. The only problem I see is that if you have drop spindles, you're beat. Mine are all one piece.

pejsa HB 07-26-2011 06:50 PM

if you send me drop spindles im sure me and my welder eric can make it work

beebani 07-27-2011 12:16 AM

Dude, that looks good, but I hope you welded it with the right rod, those are cast and if not welded right will snap right off under load.

pejsa HB 07-27-2011 02:34 AM

there done proper my friend

beebani 07-27-2011 02:41 AM

That's good, jus lookin out for ya.

pejsa HB 07-27-2011 05:25 AM

thanks im gonna get a disk brake adapter from you soon

beebani 07-27-2011 03:53 PM

Quote:

Originally Posted by pejsa HB (Post 224914)
thanks im gonna get a disk brake adapter from you soon

right on, sounds good


All times are GMT. The time now is 07:44 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.