Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   Project Build Log (http://www.infamousnissan.com/forum/forumdisplay.php?f=34)
-   -   Nissan WD21 Supercharged Pathfinder Pickup Build (http://www.infamousnissan.com/forum/showthread.php?t=41452)

Deerhurst 07-22-2020 01:12 AM

Quote:

Originally Posted by PoBoi850 (Post 538022)
Besides the fenders, what else is different about the two front clips?


Even the fenders are the same. Same as the 4x4.

89'HBV6 07-22-2020 01:37 AM

Xterra Frontier Pathfinder 3.3L Supercharger Pulley Manifold ECU Inj - $950 (clearwat
 
Quote:

Originally Posted by Hardbody92 (Post 538020)
https://tampa.craigslist.org/pnl/pts...150015568.html

Quote:

Originally Posted by Xterra Frontier Pathfinder 3.3L Supercharger Pulley Manifold ECU Inj - $950 (clearwater)
LOCAL PICK UP, ONLY NO SHIPPING, NO SHIPPING, NO SHIPPING


OK, so who lives in the Tampa/St Pete area?

PoBoi850 07-22-2020 02:23 PM

Quote:

Originally Posted by Deerhurst (Post 538024)
Even the fenders are the same. Same as the 4x4.

I only ask, because, I hear of people swapping hoods, and or other Pathy parts to their HB. Even on this thread. Some people say the HB front looks weird on the Pathy, and vice versa.

Quote:

Originally Posted by Thickfreakness (Post 501428)
For some reason the D21 front on it just seems kind of awkward to me but more power to ya! Could be a different story though when it's all together. D21 door mirrors too? Lol


Foul_Mouth 09-09-2020 01:14 PM

Got the transmission crossmember and mount fully installed. Required leaving all the bolts loose and using a drift to get everything lined up. Everything is good now.

Chopped a huge hole in the hood to make heat vents. The holes came out fine, still need a louver panel to rivet on...soon!

david29 09-09-2020 04:05 PM

Quote:

Originally Posted by Foul_Mouth (Post 539667)
Got the transmission crossmember and mount fully installed. Required leaving all the bolts loose and using a drift to get everything lined up. Everything is good now.

Chopped a huge hole in the hood to make heat vents. The holes came out fine, still need a louver panel to rivet on...soon!

My thoughts at one point when I was building my 4wd was to use 240z hood vents as they are functional.

Foul_Mouth 09-09-2020 05:35 PM

Here's what I did. I think a one piece louver panel will keep crap out and keep under hood temps down.

https://scontent-bos3-1.xx.fbcdn.net...71&oe=5F7E20A8


All times are GMT. The time now is 07:36 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.