Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (
-   04+ Titan Forum (
-   -   Pics of my 05 (

CenTexTitan 04-30-2009 09:37 PM

Pics of my 05 the pics are so big i thought photobucket had them sized down

CenTexTitan 04-30-2009 09:38 PM

sorry the pics are so big guys. as you can see there is quite abit of camber in the front im hoping that maxs spindles will fix that

O.G.Tierdrop 04-30-2009 09:39 PM

sweat titan man

pugz 04-30-2009 10:22 PM

nice titan.

its funny to see titan wheels on something they actually came on. lmao

jimmy726 04-30-2009 10:26 PM

Im for real i was just admiring his titans but that is a sweet truck

iRay808 04-30-2009 11:29 PM


baggedfrontier 04-30-2009 11:33 PM

thats badass bro...lemme know if you ever ready to come off of those titans tho... :D

Irongrave 04-30-2009 11:40 PM

thats sick

CenTexTitan 05-01-2009 01:51 AM

thanks everyone

JRock 05-01-2009 02:02 AM

that's pretty bad-ass...who did the bagwork?

CenTexTitan 05-01-2009 12:59 PM

a shop down in galveston

bdmpastx 05-01-2009 03:24 PM

Was it Kingpin?

hunglow 05-01-2009 04:06 PM

Titan looks badass

alec 05-01-2009 07:59 PM

nice any pics of the work

bdmpastx 05-01-2009 08:34 PM

Depending on the spindles and the way yours is set up, if you get the BIOMAX spindles, you may not get enough lift to clear the fenders. The bags may need to be relocated after bolting on the spindles. Just some FYI.

pugz 05-01-2009 10:22 PM

what shop in galveston???

nisrod 05-02-2009 12:03 AM

nice titan!!!

nislo 05-02-2009 01:18 AM

My spindles are dropped 2.5" and at ride height I have a factory alignment. When its laying crossmember the cambered slightly. I am very pleased with BIOKUSTUMZ work. Max is a good guy too. But 4 things to consider, you will have to send your stock spindles to California and put your truck on jack stands for 3-4 weeks, They are expensive, depending on how much the spindles are dropped you may have to get 20-24 inch wheels to clear them, and like Bdmpastx said if you slap on a set of dropped spindles you will need to redo your bag mounts to maintain enough lift.

I obviously don't have a titan but the frontier is the same setup just a lil smaller

CenTexTitan 05-02-2009 01:21 AM

true style customs. thats what im worried about is the spindles and not getting enough lift. i wonder if there is someone around that with do the front for a pretty decent price? or if there is somewhere to but the uppers lowers and maxs spindles or however everyone else is doing it to keep the camber out. i have custom uppers but not lowers. the stock uppers went all the way into the engine damn near. so he made a different set. im just hoping the spindles work and maybe raise the uppers mounts i dont know honestly guys. Ive tried to figure out geometry of suspensions and cant figure the shit out. i just want it to look right and not as much if no camber. i appreciate all the help and comments guys thanks a million!

CenTexTitan 05-02-2009 01:24 AM

can i see some pics of yalls bag mounts and the front? maybe some measurment s and stuff just anything to help. hopefully yall have some ideas or parts lengths anything. thanks once again.

'04fronty 05-07-2009 08:03 AM


Originally Posted by pugz (Post 56791)
nice titan.

its funny to see titan wheels on something they actually came on. lmao

hahaha yea know shit!!!!

almost everytime i pull up next to a titan theyre rimmed up...and they look at my wheels and ask...why stock wheels??? its seriously happend before...

TurkeyDrag 05-07-2009 01:12 PM

Titan looks damn good. I cant wait till I get mine layed out.

CenTexTitan 05-08-2009 05:14 PM

Y'all don't hate on the wheels! I'm trying. Building this truck on a budget. Getting married in a few months it will get there

JRock 05-08-2009 05:56 PM

Nobodys hating man. Half the trucks on here have titan rims lol.

x03mrmx03x 05-08-2009 09:52 PM

Nobody's hating!....
Your truck looks sick!

CenTexTitan 05-09-2009 12:27 AM

I appreciate all feedback. Like I said building on a budget. Thanks everyone now if I could get some pics on how everyone did there front because I have pretty nasty camber I think anyways

alec 05-09-2009 04:13 AM

mine has lots of camber too, its cuz i have stock everything, im gonna build uppers for mine....i like the look of the wheels are straight when im at drive height so im not changin much

alec 05-09-2009 04:15 AM

CenTexTitan 05-09-2009 11:08 AM

See I have custom uppers but not lowers. I'm thinking if I raised the upper mounts and got some spindles it might help. The camber is just when it's layed out so I don't know

CenTexTitan 05-09-2009 11:09 AM

What size is your factory rubber? Mine rubs on the rear fenders

alec 05-09-2009 03:48 PM

they are i think 245/75/17, whatever comes stock, they measure 31.5" tall.....mine is pretty close to rubbin since i bodydropped it, they didnt rub before that, but i also flared my bed sides out an inch to clear when i first bagged it

the uppers on these trucks are pretty dumb i think, they are so high up in the engine bay, when i build my uppers im gonna build new knuckles for it, they arent gonna be drop knuckles like max builds tho since it already lays hard without them, im shorting them up a few inches so i can move my uppers down out of the engine bay

once thing to check into as far as loosing some of the camber, the new fronty lca's are from what i hear the same, should bolt up, but they are about 2" shorter so that would pull the bottom of the wheel in a bit and straighten out some of the camber

CenTexTitan 05-09-2009 10:57 PM


alec 05-10-2009 01:06 AM

no problem man, i would check or take a few measurements first to make sure that they bolt up, but if they are shorter it will help your camber issue, i have thought about this but just havent got the chance to really look and know for sure if it will work or not....
do you have any pics of the setup you are runnin,....i think the way i bagged the front of mine is diff from how any other titan is up front. i had to perfect it for lift purposes since it sees off road trails almost everyday. it gets pretty good lift even bodydropped and z'd. im gonna buy some 8's for it and with that i think it may even sit alittle higher then stock

CenTexTitan 05-10-2009 04:37 AM

Damn dude all I have is custom uppers and stock everything else.

TurkeyDrag 05-10-2009 03:38 PM

If you have custom upers how come you didnt extend or raise them to do away with your cambor.

CenTexTitan 05-11-2009 02:42 AM

For one I didn't build the truck.and I guess they didn't think about it. That's just a guess

TurkeyDrag 05-11-2009 01:27 PM

Yea I was just wondering cuz Ive been trying to figuar out how Im gona bag the front on mine and everyone does em diffrent.

kyrumo 05-12-2009 12:25 AM

Looks Sick

lilFlip 05-12-2009 03:11 PM


Originally Posted by CenTexTitan (Post 59089)
Y'all don't hate on the wheels! I'm trying. Building this truck on a budget. Getting married in a few months it will get there

No one on here is hating, they just want your rims when you upgrade! :D

kyrumo 05-12-2009 05:12 PM

Before I found my Titans I would see a Titan or Armada with 20s on them I would ask them if they had the original wheels :-)

O.G.Tierdrop 05-12-2009 05:17 PM


Originally Posted by CenTexTitan (Post 59089)
Y'all don't hate on the wheels! I'm trying. Building this truck on a budget. Getting married in a few months it will get there

like moention before, there might be a few dozen of member here with different titan rims on their truck including looking for a set of 20 inch titans for my fro

kyrumo 05-12-2009 05:26 PM

What do the 20inch Titans look like ?

O.G.Tierdrop 05-12-2009 05:33 PM!BRidTbgCGk~...ctJgBw~~_2.JPG

nislo 05-12-2009 05:35 PM

those are armadas tier... the titans are soo much sexier!

O.G.Tierdrop 05-12-2009 05:37 PM

either or, as long as they are alloy, and not chrome

kyrumo 05-12-2009 05:38 PM

18s will have to do for me:-)

kyrumo 05-12-2009 05:39 PM

I like the style of the chrome one.

kyrumo 05-12-2009 05:43 PM


Originally Posted by O.G.Tierdrop (Post 60224)
either or, as long as they are alloy, and not chrome

That wheel would look sick in black

CenTexTitan 05-14-2009 03:14 AM

How much are those?

INSSAN 06-02-2009 02:16 AM

if your interested I have one of the sets of One-off titan spindles that max makes a Max sells them for $1500. and Jimmy from Jimmy's Rod And Customs can Make the arms . He's got over 16,000 miles on his set up and you can't see any wear on the 24's. and it drives just as good as stock if not better. letme know if interested

beaver720 06-06-2009 03:54 AM

i saw a dodge at gator drag this year and the front wheels damn near layed flat on the ground, those chrome 20 in. titans would look bad ass on my 720.......or do they come in 22's :rolleyes:

big sam 06-27-2009 04:44 AM

theres nothing like a fullsize truck laying rockers.

All times are GMT. The time now is 02:40 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.