Infamous Nissan - Hardbody / Frontier Forums

Infamous Nissan - Hardbody / Frontier Forums (http://www.infamousnissan.com/forum/index.php)
-   04+ Titan Forum (http://www.infamousnissan.com/forum/forumdisplay.php?f=40)
-   -   Pics of my 05 (http://www.infamousnissan.com/forum/showthread.php?t=4110)

CenTexTitan 05-01-2009 12:59 PM

a shop down in galveston

bdmpastx 05-01-2009 03:24 PM

Was it Kingpin?

hunglow 05-01-2009 04:06 PM

Titan looks badass

alec 05-01-2009 07:59 PM

nice any pics of the work

bdmpastx 05-01-2009 08:34 PM

Depending on the spindles and the way yours is set up, if you get the BIOMAX spindles, you may not get enough lift to clear the fenders. The bags may need to be relocated after bolting on the spindles. Just some FYI.

pugz 05-01-2009 10:22 PM

what shop in galveston???

nisrod 05-02-2009 12:03 AM

nice titan!!!

nislo 05-02-2009 01:18 AM

My spindles are dropped 2.5" and at ride height I have a factory alignment. When its laying crossmember the cambered slightly. I am very pleased with BIOKUSTUMZ work. Max is a good guy too. But 4 things to consider, you will have to send your stock spindles to California and put your truck on jack stands for 3-4 weeks, They are expensive, depending on how much the spindles are dropped you may have to get 20-24 inch wheels to clear them, and like Bdmpastx said if you slap on a set of dropped spindles you will need to redo your bag mounts to maintain enough lift.



I obviously don't have a titan but the frontier is the same setup just a lil smaller

CenTexTitan 05-02-2009 01:21 AM

true style customs. thats what im worried about is the spindles and not getting enough lift. i wonder if there is someone around that with do the front for a pretty decent price? or if there is somewhere to but the uppers lowers and maxs spindles or however everyone else is doing it to keep the camber out. i have custom uppers but not lowers. the stock uppers went all the way into the engine damn near. so he made a different set. im just hoping the spindles work and maybe raise the uppers mounts i dont know honestly guys. Ive tried to figure out geometry of suspensions and cant figure the shit out. i just want it to look right and not as much if no camber. i appreciate all the help and comments guys thanks a million!

CenTexTitan 05-02-2009 01:24 AM

can i see some pics of yalls bag mounts and the front? maybe some measurment s and stuff just anything to help. hopefully yall have some ideas or parts lengths anything. thanks once again.


All times are GMT. The time now is 03:01 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.