high angle steering knuckles, d21 d22
 

UPDATE: On line store created.

order yours at http://Missileworksllc.com

Cores not required

about the parts

these are tig welded pieces and require hardly any fabrication for installation. i dont have angle numbers yet, but i will tell you they far surpass the 37* steering i once had, they make your steering alot more responsive but as a trade off it is harder to turn, and will be tough on your tires.

1. you will need to trim your old steering stop out.
2. you will need an alignment.
3. you might have to bang out your wheel wells (i dont have inner wheel wells so i dont know).
4. Kits will come with extended brake lines

pics
these are the parts before modification
http://i67.photobucket.com/albums/h3...a/IMG_4396.jpg

this is how i trimmed my steering stop
http://i67.photobucket.com/albums/h3...IMG_4395-1.jpg

how they look post weld
http://i67.photobucket.com/albums/h3...a/IMG_4404.jpg

post paint
http://i67.photobucket.com/albums/h3...a/IMG_4405.jpg

installed
http://i67.photobucket.com/albums/h3...a/IMG_4406.jpg

steering angle pics
http://i67.photobucket.com/albums/h3...a/IMG_4398.jpg

http://i67.photobucket.com/albums/h3...a/IMG_4399.jpg

http://i67.photobucket.com/albums/h3...a/IMG_4401.jpg

http://i67.photobucket.com/albums/h3...a/IMG_4402.jpg

http://i67.photobucket.com/albums/h3...a/IMG_4407.jpg

http://i67.photobucket.com/albums/h3...a/IMG_4408.jpg


track tested!!!
http://i67.photobucket.com/albums/h3...sa/zoepic2.jpg

http://i67.photobucket.com/albums/h3...sa/zoepic4.jpg

Damn that's CRAZY! Good job bro

thanks man

That's cool. The only problem I see is that if you have drop spindles, you're beat. Mine are all one piece.

if you send me drop spindles im sure me and my welder eric can make it work

Dude, that looks good, but I hope you welded it with the right rod, those are cast and if not welded right will snap right off under load.

there done proper my friend

That's good, jus lookin out for ya.

thanks im gonna get a disk brake adapter from you soon

right on, sounds good

ok original post has been edited i have had a chance to track test the knuckles and they ROCK!!!

normally i would have to pick my line really carefully and normally push a really shallow line, with these i was able to swing alot wider with alot more angle.. pretty much just let go of the wheel, counter over, and it held its own line perfect!!!!

a ton more forgiving with these.

dude ,im so going to get mine done like this. thanks man. i love the diy ideas and thinking out of the box. keep it up .im also a believer in building a low budget drifter. after all we do it to have fun.

okay im a little confused on where you are welding on the knuckles. can i goet like side by side shot of a factory one and your high angle one?

you cant tell by the pics on the first page? i dont understand what your confused about, we take the stock knuckles and bring the tie rod mount in towards the hub a little over an inch

So what is stopping your wheels from turning further at this point?

The frame has always been my fav stopper lol


Ive got 255/65/16 and they stop by hitting the frame with stock steering... of course if i used spacers or a better offset it wouldnt be an issue. I am one of the few, stock ride height tall tire crew. lol

I ment to ask, with the modified knuckles, what stops it? Tires hitting frame or tension rods or what?

steering gear box stops it. im about 1/2" from my tire hitting my tc rod

nice work

These are amazing pejsa! I'll get with you once I want to change mine over. what's the offset on your steelies?

15x8.5 0-offset

quick question... what are those coilovers you got on the front? I have been looking for something like that since I got my truck. My truck came lowered on the torsion bars and pinto shocks, but it rides to soft for me. thanks.

edit: this is related to the coilovers in the pictures here, I saw your build thread and now it's all custom. If you still have these somewhere, I could take them off your hands if the price is right.

either PM him or go to his build thread and ask this is for his steering knuckles

Why are these harder on tires? like they where out faster for daily drivin or just drifting?

It a little hard on the tires due to the extra angle at full lock causes the tires to scrub a little. And the ackerman angle is changed. Causing more wear in the inside tire while turning in either direction.

oh okay will this wear out tires noticably faster?

From my experience drifting..... yes! But if your buying drift car parts you don't complain about buying tires..... daily driving tire wear was a little accelerated. And with my truck having a welded diff. That was just adding the the wear. Everyone is going to have different results due to driving habbits and other vehicle modifications.

Why don't you modify the jig to have a little less ackerman then, that much ackerman on the following wheel isn't wanted. Especially considering it has more angle than the leading wheel, you want a little less angle on the following wheel to help with wheel return during transitions.

There is less turn in on the following wheel. It would be almost physically impossible to have the leading wheel turn less than the other....

Must be the pictures, seems like your trailing wheel has more angle. Might be because I can see the rim face though.

Still making these

I live out hee in socal iv seen you drift Adams sideways Sunday
If I where to dive to you and take these in how long would they be done

I live in colorado now. So you would have to mail them

so I made my own knuckles by looking at your thread dude I love the way they feel on the track I could swing out as wide as I want and not spin out and keep going on my little single ham (KA)

Update in original post. Now you can purchase off my website and I don't require cores to be sent to me.

I'll be putting 2" drop spindles on my HB as soon as I get my truck ready to touch the ground again. Would you be able to mod the spindles for me? I saw a few posts about people wanting to send you their drop spindles but haven't seen anything yet on weather or not you figured out how to make it work. If it's possible let me know. Thanks!

It's absolutely possible for me to do. Pm me if your serious

Pm sent

Can I get the kit please I need it!!

hey i tried to order some from your website just now and it said the site wasnt able to take payments at this time. Are you still making these? How can i get some? thanks!

Missileworksllc.com is the new site to order sorry

Is the 170 for a pair?

bump. any more coming in stock soon ?

He hasn’t been on in almost 3 years.

He was last here in early 19'. You may want to drop him a PM or email and see if he's still doing this.

GL...


edit: Looks like his site is till up. Contact him that way...

i occasionally message him on instagram, didn’t realize this was the same guy haha. dude does some amazing work.