PDA

View Full Version : crewcab hardbody


sweetsouthernlowrider
09-08-2009, 03:35 AM
I started building this about a year ago, I've been wanting to build it for about 10 years, and now I am. I sold my other truck so I could build it.

DAZE752
09-08-2009, 03:36 AM
if theres pics i cannot see them

Otto347
09-08-2009, 03:37 AM
aahhhhhhhhh...................

sweetsouthernlowrider
09-08-2009, 03:40 AM
tring to get them up.

sweetsouthernlowrider
09-08-2009, 03:54 AM
just chec out photo album for now

DAZE752
09-08-2009, 04:01 AM
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=3839
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=3838
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=3837
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=3836
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=3835
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=3833
helped you out

sparkinframe
09-08-2009, 04:06 AM
holly shit that thing is long. good luck with the build, looks like u got a good start

entropyyy
09-08-2009, 04:07 AM
holy shit,that looks sick!

snoopy22
09-08-2009, 04:41 AM
bad ass

NISLED
09-08-2009, 06:31 AM
thats soooo fuckin long,love it

low96hb
09-08-2009, 09:33 AM
Keep us posted...

pugz
09-08-2009, 12:26 PM
Looks good. I love those old billets

93cantiHB
09-08-2009, 02:17 PM
wait til he gets his drive shaft in and he can move that bitch around! no need to rent a limo any more! the back of the cab got enough room for some strippers to do there thing haha. what u think about puttin a stipper pole in it jonathan?

sparkn98
09-08-2009, 03:16 PM
i dont think that will happen but ya that thing is huge man and is lookin better all the time

HybridImages
09-08-2009, 03:28 PM
holy crewcab batman...That's pretty sick. You must keep us posted on the progress.

Otto347
09-08-2009, 09:45 PM
God crew cabs look bad ass!

beaver720
09-08-2009, 09:50 PM
you going to make it a dually? truck is fuckin' sick man :thumb:

Scr8pn620
09-08-2009, 10:07 PM
I had a pic at one point of a factory one that I saw in Cancun, would have been a whole lot easier!

ScottXGTR
09-08-2009, 11:26 PM
looks line a fun project. keep us posted.

are the rear doors the same size as a navara door? or do you have a glass man in the works?

nisrod
09-08-2009, 11:53 PM
looks line a fun project. keep us posted.

are the rear doors the same size as a navara door? or do you have a glass man in the works?
my thoughts exactly!!

shavedmax
09-09-2009, 01:18 AM
looks line a fun project. keep us posted.

are the rear doors the same size as a navara door? or do you have a glass man in the works?

it looks 3x bigger than a nav door.


looks cool. i saw the buildup on ssm. are you planning on leaving the post between the front and rear doors?

sweetsouthernlowrider
09-09-2009, 11:06 PM
there almost as long as the front doors. I don't know about the glass just yet, but do you know anyone.

sweetsouthernlowrider
09-09-2009, 11:09 PM
I might not have any windows, i might just roll the edges smooth, and one big ass window

Irongrave
09-09-2009, 11:12 PM
thats sick that makes 2 crew cab HB builds on here

shavedmax
09-10-2009, 12:04 AM
there almost as long as the front doors. I don't know about the glass just yet, but do you know anyone.

i was only able to find someone that makes flat glass, not curved tempered glass.

ScottXGTR
09-10-2009, 12:10 AM
thats why i brought it up. ive seen a lot of chopped trucks that never get windows because people dont think about the glass ahead of time. getting custom glass work is really really expensive, and very few people do it.

sparkn98
09-10-2009, 12:17 AM
hey john i still think we should make the back doors paneled, with the port hole windows

sweetsouthernlowrider
09-10-2009, 02:49 AM
I may just go with lexan.

tis10w
09-16-2009, 03:58 PM
i am getting cusstom glass made i dont want the inside of my truck getting wet at a show

mini702
09-17-2009, 03:19 AM
Will 2 of the pathy windows fit with a seperator? Or a pathy and a crew cab fronty?

I think there is someone in CA that does curved. Hotrod peeps would know.

shavedmax
09-18-2009, 02:20 PM
Will 2 of the pathy windows fit with a seperator? Or a pathy and a crew cab fronty?

I think there is someone in CA that does curved. Hotrod peeps would know.

alot of hot rods have straight tempetred glass, i tried that route, no one would make curved tempered glass.

i guess he could try 2 glasses, fronty is tinted though, pathy is not

chadcrissdesign
10-12-2009, 02:13 AM
i wanna see more plz!

sweetsouthernlowrider
10-13-2009, 03:43 AM
I'll try to put them on here

sweetsouthernlowrider
10-13-2009, 03:45 AM
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=4153

sweetsouthernlowrider
10-13-2009, 03:47 AM
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=4155

chadcrissdesign
10-13-2009, 06:46 AM
more... lol i love ur truck!

twisted
10-13-2009, 06:52 AM
you can't beat long hardbody's!

mini702
10-13-2009, 06:55 PM
I noticed the older suburbans and the 2010 Hyundai and Chysler minivans have large rectangular roll down rear side glass. maybe you will get lucky.

Brad Sims
10-13-2009, 07:20 PM
dude can u post some pics of ur bag setup i can kinda see it in the last pic and it looks sick

Otto347
10-13-2009, 11:57 PM
Damn it, why o why the hole in the hood.....................all that work and just that extra step of lowering the motor. Shits ruined.

shavedmax
10-14-2009, 12:15 AM
I noticed the older suburbans and the 2010 Hyundai and Chysler minivans have large rectangular roll down rear side glass. maybe you will get lucky.

burbans use a special run channel, so it wouldnt work. the curve of the glass could also be slightly off and itll make it horrible

cruzin365
10-14-2009, 12:39 AM
that shit is bad! keep the pics comin!

sweetsouthernlowrider
10-14-2009, 02:52 AM
I wanted the intake to stick thru the hood

sweetsouthernlowrider
10-14-2009, 02:56 AM
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=4150

sweetsouthernlowrider
10-14-2009, 03:00 AM
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=4156

sweetsouthernlowrider
10-14-2009, 03:01 AM
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=4150

Ratrod25
10-14-2009, 03:07 AM
Dam looks cool.. Why the coilovers too? what does that do?

sweetsouthernlowrider
10-14-2009, 03:14 AM
the truck will ride on them and not the bags. they are for lift

trips
10-14-2009, 03:30 AM
bad ass build i love it but im a little confused wont the bags flex more than the coilovers?

chadcrissdesign
10-14-2009, 04:44 AM
should ride ok i think!

sparkinframe
10-14-2009, 05:24 AM
fuckin coooool. love the cantilever bars.

Brad Sims
10-14-2009, 11:34 PM
dude that setup is SICK!!!

Minitucking
10-18-2009, 11:03 PM
Damn man didnt realize you were in Dequincy! Sweet ass build man cant wait to see it. you need to bring to last resort show this weekend in Jennings.

sparkn98
10-21-2009, 12:43 AM
it will be at last resort i will make sure of it

sweetsouthernlowrider
10-27-2009, 01:33 AM
well how did you like the nissan, I need to put up pics of the show

Minitucking
10-27-2009, 11:38 AM
Looked great man.. everytime i went by there you must have been gone.. looked good. makes me wish i would have done a crew cab.

laynitout
10-28-2009, 08:25 PM
setup looks sick bro...

mrsteveg
10-28-2009, 08:45 PM
damn, i love this truck!

sweetsouthernlowrider
11-09-2009, 02:17 AM
well not much been going on just work and sleep. got the truck out of the shop for a show, note to self don't spray primer right before dark when the temp drops, paint will flash. it looked good until the next day, well got to sand it down and redo. maybe some airbrushing on this time.

sweetsouthernlowrider
11-09-2009, 02:18 AM
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=4376

yeti_'87HB
11-09-2009, 03:26 PM
thats is sexy right there. should try to suicide all 4 doors, that would look crazy. its coming along good tho. nice work man.

shavedmax
11-10-2009, 12:45 AM
http://www.infamousnissan.com/forum/picture.php?albumid=508&pictureid=4376


i love the old school wheels. any other pics of it at the show

sweetsouthernlowrider
11-11-2009, 12:28 AM
well I didn't get to take to many pics, I got to reprimer it then i'll take more pics of it

sweetsouthernlowrider
02-16-2010, 01:51 AM
gettin ready for show season, putting a bed floor in. tring to get all the inside floor welded up so I can bed line the inside.

cody
02-16-2010, 02:46 AM
cool as shit

GETLOWR
02-16-2010, 03:05 AM
Dope!
=]

sweetsouthernlowrider
03-08-2010, 06:05 PM
http://tinypic.com/r/2mn19xu/6

shavedmax
03-08-2010, 06:08 PM
http://tinypic.com/r/2mn19xu/6


red x!

sweetsouthernlowrider
03-08-2010, 06:16 PM
This is Jon wife and im trying to figure out how in the hell to upload the damn pictures. Im bout to take a sledge hammer to the computer.....

shavedmax
03-08-2010, 11:10 PM
http://i46.tinypic.com/2mn19xu.jpg

Brad Sims
03-08-2010, 11:33 PM
saw the truck at relaxin its sick and really long lol,u should post a pic of that badass shifter

chadcrissdesign
03-09-2010, 02:25 AM
more pix plz!

sweetsouthernlowrider
03-09-2010, 04:47 PM
http://www.infamousnissan.com/forum/picture.php?albumid=577&pictureid=5298

sweetsouthernlowrider
03-09-2010, 04:48 PM
http://www.infamousnissan.com/forum/picture.php?albumid=577&pictureid=5300

sweetsouthernlowrider
03-09-2010, 04:50 PM
http://www.infamousnissan.com/forum/picture.php?albumid=577&pictureid=5299

GrantH
03-09-2010, 05:55 PM
one of my favorites at the show. love the wheels, love the work, just a cool ass mini. that damn church van had me thrown for a loop. i couldnt stop looking at it!

Ven
03-09-2010, 06:11 PM
Looking Killer!

Swschz
03-09-2010, 08:27 PM
Looks cool...what are you using for a rear seat?

As for glass you could go with a True 4door section of glass...and a stationary piece like the pathys do....that way,you know the curve is right and it will function too.Just an idea.

manic_mechanic
03-09-2010, 08:56 PM
that truck is pure sex.....:jerk:

Karl90C1500
03-09-2010, 09:10 PM
damn that bitch is long. love it. killer shifter. you gonna make it to tex mex?

sunsetjesse
03-10-2010, 02:37 AM
damn bro that looks sick i want it haha.

Minitucking
03-10-2010, 07:14 PM
Seen it at Relaxin' that Fucker is Loooonnnggg! lol

jcjcsoccerkid
03-10-2010, 09:44 PM
looked great in person last weekend. nice truck man

sweetsouthernlowrider
03-10-2010, 11:21 PM
Looks cool...what are you using for a rear seat?

As for glass you could go with a True 4door section of glass...and a stationary piece like the pathys do....that way,you know the curve is right and it will function too.Just an idea.
just a bench seat that was in it to begin with, as for the back windows, I'm thinking about lexan. I want the whole window to open. the only time they will be up is when its parked.

sweetsouthernlowrider
03-10-2010, 11:28 PM
damn that bitch is long. love it. killer shifter. you gonna make it to tex mex?
no, I have a lot of stuff to do before my son get here, I'm going to try and make it to Lakefront tour, are you going to that show. My truck will be there, just I might be at the hospital with my wife.

sweetsouthernlowrider
04-17-2010, 03:03 AM
new pics comming soon

nislo
04-17-2010, 02:53 PM
First off sick ass truck. Take this as constructive criticism though. The truck is very long and you've added weight. The frame rails may be to small and not rigid enough to support the truck, I'm sure they flex alot. The rails from the rear kick up all the way up to the front clip are very long and straight.
http://i38.photobucket.com/albums/e103/nislo/modificationsonframe.jpg
maybe in this pic the frame wasn't complete and I can't see what size rails go under the cab. I would consider running tubing in a diagonal to brace the rear rails before they kick up. This would keep it from flexing so much and I see some joints that appear not to have fish plates. Again this pic may not be of the finished frame. I would definitely get some fish plates on there and maybe some plate gussets on underside of "notch angles" to stop some more flex. I hate to see the frame snap at a joint and destroy this truck. Have you noticed when aired up if the frame sags? The gap between the bed and cab would tell you if there is a problem.

nemosfate
04-18-2010, 05:57 PM
the progress looks great on it man....keep it up

sweetsouthernlowrider
04-19-2010, 12:22 AM
yea, i had to brace it more once I put the cab and bed on for test fit. I put the braces about where you marked. the frame is 2x3 .25 thick, thanks for looking out for me

david29
04-19-2010, 04:42 AM
Now if this truck had a Toyota dually rear from one of the rental trucks. Now that would kick it up a notch.
Like this way as well.

sweetsouthernlowrider
04-20-2010, 02:59 AM
I talked to dima at lake front tour, and I can get 19" dually rims in a 6 lug pattern. all I need is two" spacers to bring the lug out more. that way I won't have the problem of tuckin spike lug nuts

sweetsouthernlowrider
05-01-2010, 12:24 AM
http://www.infamousnissan.com/forum/picture.php?albumid=577&pictureid=5641

93nissan
05-01-2010, 03:10 AM
^^hott:D

playsnmud
05-01-2010, 03:25 AM
YEAH thats nice

hangon
05-04-2010, 02:18 AM
Thats a bad ass truck. Ive always wanted to build a 4 door HB. Nice job man.

chadcrissdesign
05-04-2010, 08:36 PM
more pix plz

sweetsouthernlowrider
05-09-2010, 05:45 AM
http://www.infamousnissan.com/forum/picture.php?albumid=577&pictureid=5642

sweetsouthernlowrider
05-09-2010, 05:46 AM
I have more pics on ssm for Lake Front Tour

hangon
05-09-2010, 11:46 PM
Any luck on rear windows yet? Have you checked the newer Dodge Grand Caravans? They have long windows on the sliding doors. And the Dodge Ram mega cabs.

sweetsouthernlowrider
05-17-2010, 11:03 PM
no, I'm just going to put lexan in them

droppednissan06
05-17-2010, 11:20 PM
damn! thats sick as hell. Ive always wanted a 4 door long bed hb

sweetsouthernlowrider
06-03-2010, 03:46 AM
yea its 19' long all together.

WRLiv
06-08-2011, 12:58 AM
Bad ass truck man!!

You know anyone with a HB near you? You should get/post pics of your truck next to a regular HB so we can compare the two. Lol

G*star
08-11-2012, 09:24 PM
what ever happened to this one, Does anyone know?

megacab hardbody
02-08-2013, 09:46 PM
wanna sell it ?