suping up a z24i

[shadowx3]

welll im kinda new here but here it go's. Da z24i just gave out blow the headgasket. And now dat i have it all apart i was woundering wat can i change to get more power with out having to swap for an sr...
:star1::IN::star1:

[Ratrod25]

You could bore it and put larger pistons, cam, header, and a HP carb i.e weber downdraft or a sidedraft set up... Then turbo it... But might just be easier to put a ka or sr motor in it...

[shadowx3]

cool but were can i get da camz and i was woundering if i can covert it 2 efi like da sr? if so wat do u think ?

[yeti_'87HB]

here's a link to the only place i've found that sells a cam for the napz motors

http://www.summitracing.com/parts/CCA-88-123-6/

[Ratrod25]

you can convert it to EFI. but it would WAY easier to do a ka or a sr, cheaper, and better aftermarket support. But if you really want to you could, you have to get a older 200sx intake and ecu etc. etc.

[shadowx3]

cooo but dont i have to plug da egr va... and how would rig da injectors ??? i;ll post some picz of da work .. wish me luck

[ScottXGTR]

not trying to be a dick, but you will get twice the replies if you use a little effort in typing your post.

using z's and dat and dis makes people stop reading.

good luck with your upgrades man. the z24 with some webers on it does decent power. and swapping to a KA24 isnt too difficult

[jimmy726]

using z's and dat and dis makes people stop reading.

Sorry not tryn to be'z a dik but hahahahahahahahaha lmao

[shadowx3]

oh no its cool thanx for ur remarks. but has anyone done that conversion ? if so what eles do i need i know i need the ecu and the intake do i need the harness .....
if anyone has done it o would love to see some picz. so i can get an ideal of wat im geting into and how long will i take because i misss ma baby.

[ScottXGTR]

http://www.infamousnissan.com/forum/showthread.php?t=2075&highlight=nis720

[shadowx3]

oh k thanx do u guys think i should go with the efi from an 87 200sx or from an 89 nissan 240sx ?? wich one would be better and about the pistons and the oil pump can i uses the one's from the 91 nissan 240sx