PDA

View Full Version : My 1st bagged truck !!!!


IndecentXxXposur
05-23-2009, 10:40 AM
Well i figured i'd post some build pics..there is alot goin on so feel free to comment and give some ideas and opinions cause this is my 1st truck...this is the truck before anything was done....http://i401.photobucket.com/albums/pp92/IndecentXxXposur/l_8be6a9b26c0bffd32213a585647a6712.jpg
this is how i got the truck..if you notice the tow straps holding the frame together..the frame ( made out of the thinest pipe they could find i guess) is broke on both sides right on top of the rear endhttp://i401.photobucket.com/albums/pp92/IndecentXxXposur/insidethebed18.jpghere is the frame now rebuilt with something a lot better...still got some wleding and grinding to do on ithttp://i401.photobucket.com/albums/pp92/IndecentXxXposur/downsized_0418091251.jpgi started over with a new bed..ima leave as much of the bed floor in as i can.right now im just fixin dents and dings and takin the body lines out(yeah no body lines some people thing im stupid some don't but i guess thats y people build trucks they like not what every1 else likes right?) plus doin caddy lights and a skinhttp://i401.photobucket.com/albums/pp92/IndecentXxXposur/0511090334.jpg
http://i401.photobucket.com/albums/pp92/IndecentXxXposur/trucktailgate.jpghere is a side view of the cab now...im suicidin tha doors and fixin to take the whole thing to bare metal to try and get as much bondo out as i can(there is gallons)http://i401.photobucket.com/albums/pp92/IndecentXxXposur/0425090545b.jpg
put this on a week or so i guesshttp://i401.photobucket.com/albums/pp92/IndecentXxXposur/0425090545.jpghere is just some other pics i took...excuse tha hood prop hahahttp://i401.photobucket.com/albums/pp92/IndecentXxXposur/Picture003.jpg
http://i401.photobucket.com/albums/pp92/IndecentXxXposur/0003.jpg

GutterHXCGrowl
05-23-2009, 09:58 PM
Looks good man! You def gotta keep that wheel and tire combo.

nis720
05-23-2009, 10:27 PM
what axle are you running? it looks narrower than stock. I like how the prowler wheels look on it.

GutterHXCGrowl
05-23-2009, 11:09 PM
That's a shortened 9 inch, I believe. That or a yota axle shortened, but I say 9 inch because of the drum size.

IndecentXxXposur
05-23-2009, 11:43 PM
yea it a ford 9 inch..it had some crazy ass gear in it if i had the motor i bet i could have went 300 mph it was insane but i got a new chunk to go in it now and i have a 4.3 vortech v6 out of a 96 s10 that is being built now w/5 speed ima try and put off in it

GutterHXCGrowl
05-23-2009, 11:47 PM
Good, was hoping to see a 4.3 swap in a hb soon.

I wanna see somebody make a nissan cyclone clone. heh

IndecentXxXposur
09-27-2009, 01:11 AM
Well here are some of the newest pics of the nissan i got some more build pics just gotta get em but i'll get em but for now here is what is goin on with it ok....this is a pic from the Relaxed Atmosphere All Star Eventhttp://i401.photobucket.com/albums/pp92/IndecentXxXposur/DSC08667.jpg

and so is thishttp://i401.photobucket.com/albums/pp92/IndecentXxXposur/DSC08668.jpg
the rest of the pics are cell phone pics and there really small so i ain't putting them on here but i will when i get my camera back

$krap_IN_flesh
09-27-2009, 02:35 AM
if your turboin it then I suggest a 240 intake to make it look nice and clean

alabama_lowlife
09-27-2009, 02:52 AM
looking good. try hitting the enter key before and after you put a pic in a thread....it'll keep your posts from being all messed up looking and hard as hell to read.

IndecentXxXposur
09-27-2009, 06:32 AM
well if i would of had something interesting to say i prolly would have but i wuz just puttin pics up...when ever i put build pics up and alot of them i'll make sure its readable then..but now it wuz just to put some new pics up

JRock
09-27-2009, 07:57 AM
you're still a homo. and i'm glad you got a new bed, cuz that old one looked as bad as my door panels...

98frontie
09-27-2009, 07:29 PM
trucks looking good!

lowfarmer
10-06-2009, 07:00 PM
Its looking great

tis10w
10-07-2009, 04:50 PM
to bad the homo sold the hardbody AND bought 4 RUNNER

kmanuel
10-07-2009, 04:55 PM
bought it back though

tis10w
10-08-2009, 03:16 PM
when did he buy it back

IndecentXxXposur
01-14-2010, 01:27 AM
....ill put better pics up later.......Wow I'm late on this one..I bought the nissan back like http://i401.photobucket.com/albums/pp92/IndecentXxXposur/m_7e13dc900df646a39ff3b43307994378.jpg3 months ago and bought the Whore runner back also. Which I'm sellin it cuz I don't have the time for it..but here's some new. Or semi new pics


http://i401.photobucket.com/albums/pp92/IndecentXxXposur/DSCN9582.jpg

Here's the back half for right now

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/m_fd8ce42d2acf423cbf06d20ec4424c-1.jpg


Sorry for the cell phone pics

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/m_e865944113254c8b8fae39f24b697214.jpg

LowEnuff
01-14-2010, 01:45 PM
trucks looking good ...

IndecentXxXposur
01-25-2010, 12:30 AM
Here is some pics of the truck at another shop we're about to cut the bed down and mount it and w/e else we can do for now

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/SunJan24192519AmericaChicago2010.jpg

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/SunJan24192418AmericaChicago2010.jpg

drginazzhb92
01-25-2010, 12:50 AM
looks good man love the back half...you figure out the front problem yet?

IndecentXxXposur
01-25-2010, 01:46 AM
Well as of right now I got re6 bags and the top bag mount is hittin the upper control arm and it won't let the front lift up enough to clear the fenders to turn so once I figure that out ima narrow the front end and all my problems should be fixed

Mr.Ryan
01-25-2010, 01:58 AM
I would narrow the front end first, then totally redesign the front bag mounts, that will save you a lot of time and wasted materials.

IndecentXxXposur
02-01-2010, 11:44 AM
Ok well I'm still workin on the bed..I decided to shorten the bed. In the pics its a like 5 1/4 inch shorten but its just tacked so this is not an end result it just to what it would look like really..hell I might not even use this bed. I might buy a new one...but anywase here's what little bit that got done over the past week..it would be more but didn't have enough beer to last Monday through Friday ha

I think it looks pretty dumb but I'll never drive it that high so it don't really matter I suppose
http://i401.photobucket.com/albums/pp92/IndecentXxXposur/SunJan31232610AmericaChicago2010.jpg

This is it laid all the way out
http://i401.photobucket.com/albums/pp92/IndecentXxXposur/SunJan31232605AmericaChicago2010.jpg

I think ima back it up because the skin hits the frame and it messes up my sheetmetal idea
http://i401.photobucket.com/albums/pp92/IndecentXxXposur/SunJan31232554AmericaChicago2010.jpg

IndecentXxXposur
02-01-2010, 11:49 AM
I would narrow the front end first, then totally redesign the front bag mounts, that will save you a lot of time and wasted materials.

I'm buyin a mustang II front end which will be everything I need to make it look clean plus if need be narrowed then it'll be easier plus it will have tubular uppers and lowers and I need them and now I can put my re7s back on instead of usin the re6 bags...plus with the front end I'm gettin it comes with drilled and slotted rotors so the guy cut me a deal and I can get the same for the back FREE!!! So needless to say I'm pretty happy

sparkinframe
02-02-2010, 06:43 AM
love the shortened bed. looks more in proportion.

tis10w
02-02-2010, 12:52 PM
i should send you a aussie deliverd long bed from 86

IndecentXxXposur
02-02-2010, 10:14 PM
i should send you a aussie deliverd long bed from 86

Sure send me parts...I love free parts

IndecentXxXposur
02-09-2010, 06:45 AM
Here is some bracing started on the bed now that I got it home..its not much progress but its some..ill put pics up next time and it will be completly sheetmetaled in

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/TueFeb09013426AmericaChicago2010.jpg

Here is the back


http://i401.photobucket.com/albums/pp92/IndecentXxXposur/TueFeb09013432AmericaChicago2010.jpg

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/TueFeb09013429AmericaChicago2010.jpg

sparkinframe
02-09-2010, 07:38 AM
looking great. glad ur sticking with ur plans.

Karl90C1500
02-09-2010, 01:10 PM
thats lookin sweet man

Cntrymini
02-09-2010, 01:15 PM
damn that looks good, what size is that wheel/tire combo ?

IndecentXxXposur
02-09-2010, 07:24 PM
damn that looks good, what size is that wheel/tire combo ?

17x7.5 in the front and 20x10 on the back..there off a plymouth prowler

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/TueFeb09142409AmericaChicago2010.jpg

Cntrymini
02-09-2010, 07:30 PM
holy thats crazy

Karl90C1500
02-09-2010, 07:50 PM
love those rims, what bolt pattern are they?

IndecentXxXposur
02-09-2010, 10:28 PM
love those rims, what bolt pattern are they?

Dunno the exact numbers but they fit plymouth prowler toyota ford ranger and etc. And some jeeps..some people like them some don't..but I don't care HA

IndecentXxXposur
04-02-2010, 12:09 AM
Ok haven't posted in a while but here's. Some new stuff for my hardbody..its gettin body work done right now but I got some stuff for it..here's the pics

This is a 95 mercedes benz c280..we are gonna pull the irs out from under it and ima use it in the nissan and ima ditch the ford 9inch..we're also gonna cut the roof off and graft it to my nissan so ill have a benz sunroof..electric and not a kit that's gonna leak !

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/d3d3ce83.jpg

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/16eeb876.jpg

Here is my Z71 I just got and I put 20s with nitto terra grapplers to haul my nissan around

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/f21e1725.jpg

And here is the new daily...not much but its ok

http://i401.photobucket.com/albums/pp92/IndecentXxXposur/ebd7a27c.jpg

manic_mechanic
04-02-2010, 01:27 AM
bad as lookin truck. like the turbo.

nislo
04-02-2010, 02:37 AM
that sunroof has drain lines on it that you will need to run down the pillars and out the bottom of truck, just to let u know what you're getting into. The glass and seal keep most of the water out but is is designed to leak into a tray below the glass then drain out.

slammed97
04-02-2010, 02:47 AM
i think that sunroof goes down and inside not up an out...

nislo
04-02-2010, 03:07 AM
i think that sunroof goes down and inside not up an out...

sure does, there won't be enough roof on a standard cab HB for a sunroof of that type. I would try to find something flip up and removable un-motorized. GL I wish I had a sunroof.

IndecentXxXposur
04-02-2010, 03:08 AM
that sunroof has drain lines on it that you will need to run down the pillars and out the bottom of truck, just to let u know what you're getting into. The glass and seal keep most of the water out but is is designed to leak into a tray below the glass then drain out.

I actually didn't know that..thanks for that info...ill make sure I do that for real..don't want no problems

i think that sunroof goes down and inside not up an out...

I don't really know but we measured everything and whether up and out or down and in it will barely work..and not by much but will work...I guess I need to check that out tomorrow when we pull the irs out