PDA

View Full Version : [FS] Motor swap parts clean up


Deerhurst
01-06-2018, 03:13 AM
Not done with the swap yet and Ill probably be adding parts as I get further along and start cleaning up my mess in the shop. Caddie, I got that guide for you....somewhere. Set it down for safe keeping and I gotta find it again. Going to wait till the new one runs before parting out the old VG30.

I can probably ship most stuff. Can work with you if you need a certain part, just shoot me a PM. Im not sure on what most stuff is worth so make an offer. Let me know what you need and we can work out shipping.

Parts not in photos:
Pathfinder serpentine idler tensioner. Make Offer.
Pathfinder oil filter bracket for VG33. $15
VG33 cap and wires. 50k miles ish. Im not going to use it. Make Offer.
1/6/2018 Founder another part. VG33 pathfinder passenger side belt tensioner and bracket. Make offer.

https://i.imgur.com/QInwjYWl.jpg

VG33 intake with throttle body, EGR and TPS. Direct removal from VG33. Should work on VG30e. Saw one on eBay for $200 but that seems outrageous. Make Offer.

VG33 fuel rail with injectors. Likely work on VG30e. Available on eBay for $90. Asking $70.

Injector wiring harness. VG33. Make Offer.

https://i.imgur.com/8PrwBWJl.jpg

VG33 lower intake plenum. Should fit VG33. $45

https://i.imgur.com/PYGbjjCl.jpg

VG33 heat shields. Make Offer

VG33 exhaust manifolds for 10mm studs. Have a couple heat shield studs broken in them. Make Offer.

https://i.imgur.com/oLAIqlEl.jpg

AC tensioner bracket for VG33. Make Offer.

Serpentine pulley for VG33 pathfinder alternator. Make Offer.

V belt Pulley for VG33 pathfinder power steering. Make Offer

VG30i EGR valve. No idea if it works but the diaphragm moves if poked with a finger. EGR line was plugged solid for a long time. Ill never use it again. Make Offer.

Power steering side bracket for VG33 pathfinder. $40

Alternator bracket for VG33 pathfinder. $40

Power steering bracket for VG33 pathfinder. The 2 metal bits on the bottom right. $20

https://i.imgur.com/U0CwuMcl.jpg

VG33e, and probably VG30e, rubber intake elbow. Make Offer.

Heater core, I think, hard lines from VG33. Make Offer.

PCV cross over line. Make Offer.

Throttle cable bracket. Make Offer.

jp2code
01-06-2018, 05:41 AM
Unfortunately for me, all of that upper VG33 stuff from the intake manifold to the plenum to the injectors will not work on the VG30 engine unless you swap the whole Frontier or Xterra ECU and wiring harness onto the truck. There are just too many additional sensors and connectors. The injectors are a different size and will not bolt up and use a different wiring color and harness connector. All of mine is in a pile, too.

Foul_Mouth
01-06-2018, 06:02 AM
Might be interested in the injector harness.

cadillacdude1975
01-06-2018, 11:46 AM
just toss me a message when your ready to mail it my way. 15 bucks should cover a small box and the ride....just wrap it in a couple layers of newspaper and duct tape. it wont weigh much.

Deerhurst
01-06-2018, 10:57 PM
Unfortunately for me, all of that upper VG33 stuff from the intake manifold to the plenum to the injectors will not work on the VG30 engine unless you swap the whole Frontier or Xterra ECU and wiring harness onto the truck. There are just too many additional sensors and connectors. The injectors are a different size and will not bolt up and use a different wiring color and harness connector. All of mine is in a pile, too.

Interesting. Figured it would be just fine as the wiring harness I think only does the injectors.

Might be interested in the injector harness.

Let me know. Its got all 6 injector plugs, looks like 3 other plugs and the larger main plugs with both side of the plug. I can get better pics if you want.

just toss me a message when your ready to mail it my way. 15 bucks should cover a small box and the ride....just wrap it in a couple layers of newspaper and duct tape. it wont weigh much.

Can do! Ill probably just flat rate and bubble wrap it.

Foul_Mouth
01-07-2018, 12:59 AM
A pic will help me decide. Thanks!

Deerhurst
01-07-2018, 01:18 AM
A pic will help me decide. Thanks!

Will do! I'm shooting for tomorrow evening for pics.