neeed tips removing ac

[93nissan]

as far as doing anything with the motor? i see copper lines going into the motor wut do i do when removing them.

[infamous_dough_boi]

are u just removin the ac and not planin on reinstallin it? if so just unbolt everything that has to do with the ac. if it still has frieon in it then unbolt the lines slowly because its under pressure. as far as the lines if u dont plan on reinstallin just remove everything from the engine bay and under the dash.

[93nissan]

what about the couple lined going to the motor when takening them off do i plug the holes on the motor?

[drginazzhb92]

i was actually wondering the samething can i take off the ac compressor and the belt and be fine???

[infamous_dough_boi]

what about the couple lined going to the motor when takening them off do i plug the holes on the motor?

are you talkin bout the heater hoses? take some pics of what u are removin. that will help me to help u

i was actually wondering the samething can i take off the ac compressor and the belt and be fine???

yea if u are just removin the ac u can remove the comp and belt if the belt goes to nothing else. if it does just get a shorter belt. then u can remove the condensor and lines to the ac.

as i said tho if you can get some pics of what u want to remove i can help ya a lil more guys. if nothing else go get a haynes manuel and it will show u step by step an how to remove but with oics i can help ya with out u spendin money on the book

[JRock]

are the compressors the same on a ka24 and ka24d? cuz i damn sure need one.

[infamous_dough_boi]

are the compressors the same on a ka24 and ka24d? cuz i damn sure need one.

im not sure jrock but im sure u could look it up on orileys web site or and auto parts store site man.

[JRock]

according to courtesy parts, it's the same part number...27630... hummmm.... hey, when you guys get them off, hit me up.

it's also showing 92600 with either d21 or d22 as a suffix... that's the same part, right? charlie? bueller?

[VG30E]

You will need the bracket too but if you got that it would bolt up then.

[VG30E]

d21 compressor number is 92600-56G11
d22u is a 92600-8B401 so they are different but looking at them they should swap with little to no work involved.

[nissan1995]

i have a compressor too jrock that i dont need


and i have my ac and heater completly removed i just started from the compressor and took everything off peice my peice from the engine bay then went under the dash and took the rest out, i even took out the ducting but thats optional

but if u r planning to reinstall it then be sure to label everything cuz there r lots of parts to keep up with

[JRock]

everything's there, the idler pulley is in a box somewhere, just my compressor or the clutch took a dump on me. and it's cheaper to buy a rebuilt compressor w/a new clutch, than it is to buy the clutch.

Ok, throw me some numbers. It's hot as shit here when I'm stuck on the freeway with no a/c.

[93nissan]

here are sum pic i tookhttp://www.infamousnissan.com/forum/picture.php?albumid=204&pictureid=2350

[93nissan]

http://www.infamousnissan.com/forum/picture.php?albumid=204&pictureid=2349

[93nissan]

and jrock i have a compressor u can hace if u want it let me know.

[infamous_dough_boi]

those look to be the heater lines. so yea just pull them off and plug the motor side. u will need to check the coolant level after u remove them cause u will loose some when u pull them off. after u pull these lines u can remove the heater core but the heater hoses have nothing to do with ur ac. the ac lines will unscrew from the ac system.

[93nissan]

wut do u use to plug em up?

[infamous_dough_boi]

on the trucks that i have by passed the heater i just took enough hose to go from one outlet on the motor to the other and connected them so the coolant would still flow. but im sure u could pick up something to plug it with at the local parts store.

[JRock]

PM me w/some prices. I can get a rebuilt one out of FL off eBay for $180 or so shipped, so I'm looking for less than that, but I'm not trying to jew anybody too hard.

[Freak]

im looking to do a full AC swap, any parts you would be willing to part with id gladly take, david29 had told me the ac compressors from the ka will even fit the z24i