Damian
02-22-2009, 02:31 PM
hi again, thanks for the help on getting the spark, now i can pour gas down the throttle body and it will run. i checked what i believe is the inline fuse guy (part of a small black assembly with other clips in it for p.c.v ect) it just has a wire jumper across the terminals, im getting 12v. i believe i read on here that the signal from the eccs is a ground pulse. does anybody know which terminal feeds this? also next to the eccs there is a grounded black wire screwed to where the seat mounts, this is a broken wire, not sure if this was connected anywere to a pin or something. thanks again!!